Abstract:In the present work, CCl4-adsorbed activated carbon pretreated by the mechanochemical method (CCl4-AC) was produced for gas-phase mercury capture. The physicochemical properties of the CCl4-AC sorbent were analyzed via N2 adsorption, scanning electron microscopy (SEM), and X-ray photoelectron spectroscopy (XPS). The mercury capture performance of the CCl4-AC sorbent under different flue gas components was investigated in a fixed-bed experimental device. The programmed temperature desorption of mercury was used to determine the mercury capture product of the spent CCl4-AC. Finally, the mass transfer factor model proposed by Fulazzaky was used to analyze mercury capture on the CCl4-AC for clarifying its characteristics. The results showed that the prepared CCl4-AC can be used as a mercury sorbent because of its high mercury capture performance. Mercury capture by the CCl4-AC was interfered by SO2 and promoted by O2 and H2O. Hg-temperature programmed desorption (Hg-TPD) analysis indicated that the main mercury capture products of the CCl4-AC were HgCl2 and HgO. Because of the presence of SO2 in flue gas, there was a little Hg2SO4 formation on the sorbent. XPS analysis showed that the functional group of C-Cl played the dominant role in Hg0 capture, and part of the C-Cl groups were converted into Cl- after mercury capture. The mercury desorption energy of the spent CCl4-AC was 50.49 kJ/mol and stronger compared with that of raw activated carbon. Mass transfer analysis displayed that surface adsorption was the main form at the beginning of mercury adsorption, and the external mass transfer was the mercury adsorption rate-controlling step. Then, mercury adsorption entered the second stage; internal diffusion adsorption stage with internal mass transfer became the adsorption rate control step.

Experimental Study on Mercury Capture Using Activated Carbon Injection in Simulated Flue Gas

Experimental study on mercury removal by activated carbon injection and predictive model

Numerical Simulation on Adsorbent Injection System for Mercury Removal from Coal-Fired Flue Gas

Effects of Coal-Fired Flue Gas Components on Mercury Removal by the Mechanochemical S-Modified Petroleum Coke

AN EXPERIMENTAL STUDY ON ACTIVATED CARBON SORBENTS FOR GAS-PHASE MERCURY REMOVAL FROM FLUE GAS

An Experimental Study on Coal-Char Sorbents for Gas-Phase Mercury Removal from Flue Gas

Factors Affecting Amount of Activated Carbon Injection for Flue Gas Mercury Control

Fixed-bed Experimental Evaluation of Carbon Performance on Elemental Mercury Adsorption

Activated Carbon for Capturing Hg in Flue Gas under O-2/CO2 Combustion Conditions. Part 1: Experimental and Kinetic Study

Modeling and Experimental Studies of In-Duct Mercury Capture by Activated Carbon Injection in an Entrained Flow Reactor

Activated Carbon for Capturing Hg in Flue Gas under O-2/CO2 Combustion Conditions. Part 2: Modeling Study and Adsorption Mechanism

Mercury Adsorption Characteristics of Activated Carbon in Coal-Fired Flue Gas

Experimental Study on Hg Vapor Adsorption of Modified Activated Carbons in Simulated Flue Gas

Modeling Of Elemental Mercury Control By Sorbents From Simulated Flue Gases

Effects of CO and CO2 on the Removal of Elemental Mercury over Carbonaceous Surfaces

Modeling mercury adsorption on carbon particles in simulated flue gas

Performance of CuCl2-Modified Activated Carbon on Mercury Capture after Injection in an Entrained Flow Reactor

Kinetics and mechanism of activated carbon adsorption for mercury removal

Influence of Flue Gas Conditions on Mercury Removal by Activated Carbon Injection in a Pilot-Scale Circulating Fluidized Bed Combustion System

Mercury Capture Performance and Kinetics of CCl4-Adsorbed Activated Carbon Pretreated by the Mechanochemical Method

Research on Vapor Mercury Adsorption by Ca-Based Sorbents