Abstract:This paper investigates experimentally the flame height and temperature profile of window ejected thermal plume from compartment fire without facade wall. The previous works and correlations on these characteristics of such thermal plume mainly concern the condition with a facade wall, where the air entrainment of the thermal plume from the side of the facade wall is restricted. However, such entrainment constraint effect does not exist when the fire occurs at the top floor of the building noting that there is no facade above the top floor, for which scenario the flame height and temperature profile of the thermal plume characteristics have not been quantified in the literature. In this work, comprehensive experiments were carried out by employing a reduced scale model (1:8), consisting of a 0.4 m cubic fire compartment with six different window openings corresponding to various ventilation factors (A root H). A propane square porous burner was set as fire source with various fuel mass flow meters and hence heat release rate. All the tests were designed as uN-ventilated condition that stable flame was observed outside the window. The flame height outside the window was recorded through a CCD camera from the side view. The temperature profiles of the ejected fire plume outside the window were measured by the thermocouple arrays (7 rows, 7 columns) located above the top of the compartment. These measured quantities without the facade wall were compared from those with a facade wall. Results showed that the flame height can be still well correlated non-dimensionally by the excess fuel heat release rate and the characteristic length scale (l(1) = A root H-2/5) of the window. However, the flame height with a facade wall was higher, being 1.31 times of those without a facade wall. This difference was physically quantified by the air entrainment change due to constraint effect from the facade wall. The radial temperature profile in the ejected thermal fire plume at various height can be globally represented by the Gaussian function (T-z.x-T-infinity/T-z.max-T-infinity = e([-beta(x-xm/FWHM)2])) with and without facade wall, where the value of beta was found to be 2 In 2. These quantifications and correlations on window-ejected thermal plume characteristics without a facade wall, providing a significant supplementary over previous works focusing on condition with the facade wall, will be an important addition for the estimation of such thermal plume characteristics and its thermal impacts. This work, providing experimental data and correlations on window ejected thermal plume characteristics from compartment fire at the top level of the building without the effect of facade wall, will be an important supplementary over previous knowledge focusing on the scenario with the effect of facade wall.

An experimental study on buoyant spilled thermal plume temperature profile from over-ventilated enclosure fires in a reduced air pressure

An experimental investigation on temperature profile of buoyant spill plume from under-ventilated compartment fires in a reduced pressure atmosphere at high altitude

Global Behaviors of Enclosure Fire and Façade Flame Heights in Normal and Reduced Atmospheric Pressures at Two Altitudes

Experimental Study on Flame Height and Temperature Profile of Buoyant Window Spill Plume from an Under-Ventilated Compartment Fire

Flame Height and Temperature Profile of Window Ejected Thermal Plume from Compartment Fire Without Facade Wall

An Experimental Study of Fire Development under Varying Ventilation Conditions During the Depressurization Process in Pressurized Buildings

Experimental Investigation on Lateral Temperature Profile of Window-Ejected Facade Fire Plume with Ambient Wind

Experimental Study on Vertical Temperature of Facade Fire Plume Ejected from Compartment Constrained by Adjacent Single Sidewall

Heat Flux Profile Upon Building Facade Due to Ejected Thermal Plume from Window in A Subatmospheric Pressure at High Altitude

Experimental Study on the Heat Flux Profile Upon the Building Facade of the Window-Ejected Fire Plume

Thermal and Fire Risk Analysis of Low Pressure on Building Energy Conservation Material Flexible Polyurethane with Various Inclined Facade Constructions

Experimental Study on the Transitional Behavior of the Room Fire under Sub-Atmospheric Pressures

Transverse and Lateral Temperature Profiles of the Window-Ejected Thermal Plume along the Facade

Influences of sub-atmospheric pressure on downward flame spread over typical insulation material with parallel glass curtain wall structure in underground buildings

Effects of ambient pressure on fire-induced buoyancy driven plume dispersion and re-entrainment behavior in a street canyon

Heat Flux Profile Upon Building Facade with Side Walls Due to Window Ejected Fire Plume: an Experimental Investigation and Global Correlation

Experimental study on temperature profile in long-narrow compartment fire with multiple lateral openings

An Experimental Study on Vertical Temperature Profile of Facade Fire Plume Ejected from Compartment with an Opening Subjected to External Wind Normal to Facade

Experimental Study of Ejected Fire Plume from an Opening under Facing Wind Passing Through the Roof

N-Heptane Pool Fire Behavior In A Controlled Oxygen And Low-Pressure Environment

An Investigation on Spill Plume Temperature of Large Space Building Fires