Superelastic Properties of Aged FeNiCoAlTaB Cold-Rolled Shape Memory Alloys
Li-Wei Tseng,Miao Song,Wei-Cheng Chen,Yi-Ting Hsu,Chih-Hsuan Chen
DOI: https://doi.org/10.3390/met14060643
IF: 2.695
2024-05-29
Metals
Abstract:In the present study, microstructure and cyclic tensile tests were used to measure the superelastic responses of Fe40.95Ni28Co17Al11.5Ta2.5B0.05 (at.%) shape memory alloys after 97% cold rolling. Cold-rolled samples underwent annealing heat treatment (1250 °C/1 h) followed by quenching in water or aging heat treatment (700 °C/6 h and 700 °C/12 h) followed by quenching in water. The microstructure results showed that the average grain size increased from 210 μm to 1570 μm as annealing times increased from 0.5 h to 1 h. X-ray diffraction (XRD) spectra for FeNiCoAlTaB (NCATB) showed that in cold-rolled alloys after solution, the strong peak was in the face-centered cubic (γ, FCC) structure. In aged samples, a new peak (γ', FCC) emerged, the intensity of which increased as aging times rose from 6 to 12 h. Transmission electron microscope (TEM) images showed that the average precipitate size was around 10 nm in 700 °C/6 h specimens and 18 nm in 700 °C/12 h specimens. The precipitate was enriched in Ni, Al, and Ta elements and exhibited an L12 crystal structure. Tensile samples aged at 700 °C for 6 and 12 h exhibited recoverable strains of 1% and 2.6%, respectively, at room temperature. Digital image correlation (DIC) results for the sample aged at 700 °C for 12 h showed that two martensite variants were activated during the superelastic test. Such variants can form corresponding variant pairs (CVPs), which promote tensile deformation. The tensile sample exhibited a gradual cyclic degradation, and a large irrecoverable strain was observed after the test. This irrecoverable strain was the result of residual martensite, which was pinned by dislocations.
materials science, multidisciplinary,metallurgy & metallurgical engineering