Abstract:As a typical non-destructive testing method, electromagnetic acoustic testing is often used to test metal materials and components. The main shortcoming in practical application is poor energy conversion efficiency, especially in the case of non-ferromagnetic materials. To solve this problem, this article proposed a Lamb electromagnetic acoustic transducer (EMAT) for ultrasonic testing of non-ferromagnetic plates. The new type of EMAT consists of a track coil and a group of periodic permanent magnets (PPMs). Conventional Lamb wave EMATs typically use meander coil and rectangular magnet to generate Lorentz forces with a periodic distribution. The track coil provides stronger eddy currents than meander coil, and the PPMs provide more even bias magnetic fields than rectangular magnet, which generates Lorentz forces with a similar periodic distribution and larger values, compared with the conventional Lamb wave EMAT. Then two-dimensional finite element (FE) simulation models of the conventional meander-line-coil (MLC) and TCPPM transducers were completed to compare the distribution of eddy currents, bias magnetic fields and Lorentz forces. Eventually, a series of transducers with coils of different sizes were manufactured and incorporated into the experimental study. The experimental results proved that the TCPPM transducers could generate and receive more powerful ultrasonic Lamb waves than the conventional MLC EMATs. Due to the dispersion characteristics, pure A0 or S0 mode of ultrasonic Lamb waves can be generated and received by selecting suitable frequencies. Compared with the MLC EMATs, the maximum amplitudes of the A0 and S0 modes were increased by 18.9 dB and 10.4 dB, respectively. The contribution of the direction of Lorentz forces to A0 and S0 mode Lamb waves was also verified by comparing the signals of three groups of TCPPM EMATs with different structures.

Unidirectional line-focusing electromagnetic acoustic transducer

Numerical and experimental analysis of unidirectional meander-line coil electromagnetic acoustic transducers.

A New Design of the Dual-Mode and Pure Longitudinal EMAT by Using a Radial-Flux-Focusing Magnet

Meanderline Coil Arrangement of Ultrasonic Wave Line-Focusing Electromagnetic Acoustic Transducers.

Oblique Point-Focusing Shear-Horizontal Guided-Wave Electromagnetic Acoustic Transducer with Variable PPM Spacing

Development of a new EMAT for multi-helical SH guided waves based on magnetostrictive effect

Unidirectional focusing Rayleigh waves EMAT for plate surface defect Inspection

Development of an Omnidirectional SH 0 Mode Electromagnetic Acoustic Transducer Employing a Circumferential Periodic Permanent Magnet Array

Optimal Design of Meander-line-coil Surface Wave Electromagnetic Acoustic Transducers

Analytical Modelling and Analysis of the Meander-Line Coil Emats

Numerical Evaluation of Focal Position Selection by Line-Focusing Electromagnetic Acoustic Transducer with Experimental Validation

An Omnidirectional EMAT Employing Spiral Coil and Annular Magnets for Enhanced Generation of A0 Mode Lamb Wave

Meander Line Coil EMAT Based on Spatial Pulse Compression for Rayleigh Waves

Influence of coil parameters on transduction performance of unidirectional EMATs for Rayleigh wave

A Lorentz Force EMAT Design with Racetrack Coil and Periodic Permanent Magnets for Selective Enhancement of Ultrasonic Lamb Wave Generation

An Emat Design with Track Coil and Periodic Permanent Magnets for Enhanced Ultrasonic Lamb Wave Generation in Non-Ferromagnetic Plates

A new surface-wave EMAT design of enhanced transduction efficiency

Design of A Rayleigh Wave EMAT by Using Racetrack Coil and Periodic Permanent Magnets

Development of a Longitudinal Wave EMAT with High Conversion Efficiency

3-D Modeling and Analysis of Meander-Line-Coil Surface Wave Emats

A New Omni-Directional EMAT Using Contra-flexure Coils for Plate Inspection