Abstract:The prediction of noise radiated by underwater structures is one of the most important research topics in the field of acoustics. This paper aims to set up an integrated approach for acoustic radiation analysis that could be used to assess and optimize the vibro-acoustic performance of pre-determined design targets, while identifying and quantifying the sound sources responsible for the behaviour. Such an approach, based on numerical procedures or experimental data, enables the fast prediction of sound radiation from a typical submarine cabin (a double cylindrical shell with superstructure). Vibro-acoustic prediction in the low- to mid-frequency range is generally performed through the boundary element method (BEM) or finite element method (FEM). In this paper, a combined usage of the two methodologies is adopted: FEM is used for the structural dynamics and BEM for the acoustic problem resolution. The acoustic field obtained by the FEM/BEM approach is adopted as the reference result. Meanwhile, acoustic transfer vector (ATV) technology is performed with the use of velocity distribution of the cabin. It is verified that the calculation results between the two methods are in substantial agreement, while the ATV method shows greater efficiency. Experimental research on the vibration of a scaled model is also performed. Comparing the experimental and numerical radiation results based on measured vibration data enables the accuracy level of the ATV forecast method to be assessed. From this, it is probable that the fast prediction of sound radiation by use of ATV is an effective approach for rapid evaluation of the vibro-acoustic response in the engine development process.

Engineering Prediction on Vibration Reduction in Typical Ship Structures

Numerical Prediction Method for Stern Vibration of Refitting Naval Ships

Energy-averaged Method for Ship Mechanical Noise Prediction under Kinematic Excitation in the Full Frequency Domain

Prediction and Control of Cabin’s Noise of a Three-hulled High-speed Ship

An Engineering Prediction Method For Large Amplitude Motions Of Ships In Waves

The Fast Prediction of Sound Radiation from Typical Submarine Cabin Based on Acoustic Transfer Vector

Application of a Hybrid Method in the Analysis Acoustic-structure Coupled System

Predicting Method of Natural Frequency for Ship'S Overall Vertical Vibration

Experimental Investigation and Numerical Simulation of Ship Stern Structural Vibration Model

Practical prediction of ship cabin noise based on semi-empirical method

Experimental and Numerical Study on Vibration of the Full-Revolving Propulsion Ship Stern

Fast Average Prediction Method Based on the Upper -Lower Limit Theory for Ship’s Mechanical Noise

Vibration Response Analysis of a New Scientific Research Ship Based on Finite Element Modeling

Design Methods for Damping Materials Applied to Ships

Analysis of vibration reduction performance of vibration isolation system based on particle damping

Numerical Analysis of Vibro-Acoustic Characters of Ship

A Time Domain Three-Dimensional Sono-Elastic Method for Ships’ Vibration and Acoustic Radiation Analysis in Water

Design and Analysis of a Dynamic Absorber for Reducing Axial Vibration of Ship Shafting

Analysis of vibration transmission at the corner interface of two plates for reduction of structure-borne sound

Numerical and Experimental Investigation on Vibro-Acoustic Response of a Shaft-Hull System

Vibration Mode Analysis and Response Prediction of Stern Structure for Planing Boat