Abstract:An efficient intersection signal scheme is of vital significance to urban traffic operation. At present, multiperiod fixed-timing control is still the traffic signal control method adopted by many urban intersections. For the optimization problem of signal scheme selection at signalized intersections, we proposed three two-step prediction optimization methods that match the traffic arrival in different periods with the corresponding optimal signal scheme, aimed at reducing the total delay of vehicles at signalized intersections. The first method predicts the traffic flow in each entrance direction of the intersection by minimizing the mean square error (MSE), then obtains the total vehicle delay of each scheme in the signal scheme set through the Highway Capacity Manual 2010 delay formula, and finally substitutes it into the signal optimization model to obtain the optimal scheme combination. The second method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing the MSE and then substitutes it into the signal optimization model to obtain the optimal scheme combination. The third method directly predicts the total vehicle delay at intersections of all signal schemes by minimizing both the MSE and the prediction error between every two schemes and then substitutes it into the signal optimization model to obtain the optimal scheme combination. Verification based on actual intersection shows that better optimization results can be obtained by integrating optimization objectives into the prediction process. Besides, some practical insights can be drawn through applicability analysis and sensitivity analysis. First, the proposed model is more suitable for intersections where traffic arrivals vary greatly. Second, with the increase of scheme differences within a certain range, the advantages of the proposed method become more obvious. Finally, it is necessary to balance the flexibility of traffic control with control effectiveness in practical applications.

Design of transit phase insertion strategy at intersections based on pre-signals technique

Bus signal priority method at arterial signal progression

Traffic Signal Control Optimization Strategy Based on Simulation

Multi-phase bus signal priority strategy at isolated intersections

Multiple-Phase Bus Signal Priority Strategy for Arterial Coordination Intersection

General Multi-Phase Intelligent Control Method for Traffic Flow at Single Intersection

Development and Evaluation of a Passive Bus Signal Priority Algorithm at Isolated Intersection

Bus Priority Signal Control for Signalized Intersection without Bus Lane

An Approach of Transit Passive Priority with Transit Phase Overlapped at Intersection of Arterial Signal Progression

Control Strategies for Transit Priority Based on Queue Modeling and Surrogate Testing

Simulation analysis of traffic signal control and transit signal priority strategies under Arterial Coordination Conditions

Traffic Design and Signal Timing of Staggered Intersections Based on a Sorting Strategy

A Semi-"Smart Predict, then Optimize" Method for Traffic Signal Control.

A real-time traffic control method for the intersection with pre-signals under the phase swap sorting strategy

Coordinated Optimization of Signal Timings for Intersection Approach with Presignals

Study on Pedestrian Signal Cycle Optimization

Optimal signal-planning method of intersections based on bus priority

Analysis of Vehicle Delay of Intersections with Pre-Signals Based on Bus Priority

Optimization Method of Signal Timing Parameters Considering Comprehensive Efficiency of All Approach Lanes

Absolute minimum green calculation for vehicle phase at signalized intersections with bus rapid transit signal priority

Optimization of Stretching-Segment Design and Signal Timing in Traffic Control