Abstract:Geometric complexities and multi-physical phenomena add difficulties for predicting the thermal field and hence thermal management of an electric motor. A numerical design model that combined electromagnetic and thermal-fluid analysis was proposed for disclosing the detailed temperature distributions of each component in an electric motor. The thermal fluid analysis implemented ANSYS-Fluent code to unravel the thermal field of the interior permanent magnet synchronous electric motor fitted with a smooth or novel spirally twisted channel in the cooling water jacket of a stator with and without shaft cooling. In accordance with the thermal powers converted from the various electromagnetic losses of the electric motor, the complex heat conduction model with realistic thermal boundary conditions was formulated. Initially, the turbulent flow structures and channel averaged Nusselt numbers of the spiral channels without and with the sectional twist were comparatively examined for acquiring the convective thermal boundary conditions in the water jacket. With the high thermal conductivity of the aluminum water jacket, the heat-transfer improvements from the smooth-spiral-channel conditions by using the twisted spiral channel were effective for reducing the average temperatures by about 10% but less effective for altering the characteristic thermal field in the water jacket. At 1290 < Dn < 6455 or 5000 < Re < 25,000 for the spiral channel flows, the channel average Nusselt numbers ratios between the smooth and twisted spiral channels were elevated to 1.18–1.09 but decreased with the increase of Dn or Re. A set of heat-transfer correlations for estimating the Nusselt numbers of Taylor flow in the rotor-to-stator air gap was newly devised from the data available in the literature. While the cooling effectiveness of the water jacket and shaft was boosted by the sectional twists along the spiral channel of the water jacket, the presence of Taylor flow in the annual air gap prohibited the effective rotor-to-stator heat transmission, leading to hot spots in the rotor. By way of airflow cooling through the rotating hollow shaft, the high temperatures in the rotor were considerably moderated. As the development of Taylor flow between the rotor and stator was inevitable, the development of active or passive rotor cooling schemes was necessary for extending the power density of an electric motor. Unlike the previous thermal circuit or lumped-parameter thermal model that predicted the overall temperatures of motor components, the present coupled electromagnetic and thermal-fluid model can reveal the detailed temperature distributions in an electric motor to probe the local hot spots of each component in order to avoid overheating at the early design stage.

Thermal modeling for the motor in semi-hermetic screw refrigeration compressors under part-load conditions

Thermal and hydraulic analysis on the flow around the motor in semi-hermetic twin screw refrigeration compressors

Flow and Heat Transfer Analysis of the Motor in Screw Compressor

Numerical Study of Refrigerant Flow in Screw Compressor Motor for High Temperature Heat Pump

Numerical Research on Refrigerant Injection for Motor Cooling of Screw Compressor for Heat Pump with Large Temperature Lift

Research on Motor Cooling Process of Centrifugal Refrigeration Compressor with Gas Bearings

Modeling and Investigation of Thermal Characteristics of A Water-Cooled Permanent-Magnet Linear Motor

Semi-empirical Model of the Twin-Screw Refrigeration Compressor with Capacity Control Devices

Numerical Analysis of Temperature Distribution of Motor-Refrigerant in A R32 Rotary Compressor

Thermal characteristics study of a water-cooled permanent magnet linear motor

Theoretical and experimental investigation on the performance of screw refrigeration compressor under part-load conditions

Theoretical Modeling and Experimental Verification of the Motor Design for a 500 G Micro Moving-Coil Linear Compressor Operating at 90–140 Hz

Thermal Optimization of a Totally Enclosed Forced Ventilated Permanentmagnet Traction Motor Using Lumped Parameter and Partial Computational Fluid Dynamics Modeling

Research of Thermal Dynamic Characteristics for Variable Load Single Screw Refrigeration Compressor with Different Capacity Control Mechanism

Heat Transfer and Thermal Management of Interior Permanent Magnet Synchronous Electric Motor

Study on the Temperature Distribution of Motor and Inverter in an Electric Scroll Compressor for Vehicle Air Conditioning under Refrigeration Conditions

Research on Temperature-Rise Characteristics of Motor Based on Simplified Lumped-Parameter Thermal Network Model

Simulation of Dynamic Characteristics of Moving Magnet Linear Compressor for Refrigerator

Improved thermal model of forced air-cooled motors considering heat transfer in wire-wound winding and end region

Modeling of A Vapor-Compression Chiller for Performance Study

Thermal Analysis of Transverse Flux Linear Switched Reluctance Motor Based on Lumped Parameter Thermal Network Method