Abstract:As a detonation wave propagates from a confined tube to an unconfined space, it undergoes di↵raction, which is characterized by a change of geometry from a quasi-planar wave to a cylindrical or spherical wave [1–4]. Depending on the mixture composition, thermodynamic conditions, detonation velocity at the tube exit, the geometry of the area expansion and tube cross section, the detonation wave can be either extinguished (sub-critical regime) or re-initiated (super-critical regime) [2]. Detonation di↵raction has been extensively studied both experimentally and through numerical simulations. Since Zeldovich et al.’s pioneering work [5], numerous studies have been performed on detonation di↵raction using a variety of experimental geometry and techniques, as summarized by Schultz [4] in 2000. Since then, a number of investigations have been performed, for example by Khasainov et al. [6], Meredith et al. [7], and Nagura et al. [8]. The most advanced experimental investigation is the study of Pintgen [1, 2] who performed simultaneous imaging of the shock front and reaction zone, using schlieren and Planar Laser Induced Fluorescence (PLIF), as well as multi-exposure and stereoscopic chemiluminescence imaging. Jones et al. [10–13] and Oran et al. [14, 15] used numerical simulations to study the di↵raction of detonation and reignition process at an abrupt tube diameter increase (180 angle). Layered and uniform H2-O2(-Ar) mixtures were modeled. The chemical schemes were either 1-step or 2-step models. Arienti et al. [9] and Nagura et al. [8] performed simulations of detonation di↵raction from a tube to an unconfined volume (90 angle). Arienti used a 1-step reaction model characterized by di↵erent activation energies whereas Nagura employed a 2-step scheme to model a stoichiometric H2-air mixture. Khasainov et al. [6] studied the di↵raction of detonation from a tube to a cone. A stoichiometric C2H2-O2 mixture was considered using a 1-step pressure dependent reaction model. Deiterding [16] studied the failure and reignition of di↵racting detonations in a stoichiometric H2-O2 mixture diluted with 70% argon. High-resolution numerical simulations with mesh refinement were performed using Euler equations. The reactivity of the mixture was described using a detailed reaction model composed of 34 irreversible reactions and 9 species. From this literature review, we see that most numerical studies have been performed using an inviscid gas model (Euler equations) and global (1or 2-step) kinetic schemes. The present study aims at performing numerical simulation of detonation di↵raction using a viscous gas model (Navier-Stokes equations) and accurate chemical and thermodynamic models to allow for a more realistic comparison with the experimental data of Pintgen in terms of di↵racting detonation behaviour and structure.

Numerical Research of Effect of Pre-Detonator Installment Mode on Detonation Initiation Characteristics

Numerical investigation of pre-detonator in rotating detonation engine

Numerical Investigation on Effects of Ignition Energy on Two-phase Detonation Wave Formation

Numerical Studies of Pre-Detonator Ignition of Pulse Detonation Engine

Numerical investigation of detonation initiation in a modeled rotating detonation engine

Numerical Investigation on New Engine Combustion Charactristic of Helicopter

Numerical simulations of a hydrogen-air pre-detonator for detonation engines

Numerical investigation of detonation initiation for low-volatility liquid fuel/air mixtures

Experimental study on initiation and propagation behavior of propane/oxygen/nitrogen detonation wave

Numerical research on kerosene/hydrogen/air rotating detonation engines with discrete injection strategies

Effect of Initial Disturbance on The Detonation Front Structure of a Narrow Duct

Effects of Disturbance on Detonation Initiation in H-2/O-2/N-2 Mixture

The precursor shock wave and flame propagation enhancement by CO2 injection in a methane-oxygen mixture

Propagation behavior of rotating detonation waves with premixed kerosene/air mixtures

Effect of ignition parameters on detonation initiation using toroidal shock wave focusing

Modelling Rotating Detonative Combustion Fueled by Partially Pre-vaporized n-Heptane Sprays

Numerical investigation on the rotating detonation critical mode for a methane–air mixture in an annular tube using reactive Navier–Stokes equations

Three-dimensional simulations of detonation propagation in circular tubes: Effects of jet initiation and wall reflection

Numerical Study of Gaseous Detonation Propagation Through a Bifurcated Tube

Effects of inert gas jet on the transition from deflagration to detonation in a stoichiometric methane-oxygen mixture

Numerical Study of Detonation Wave Di ↵ raction in Hydrogen-based Mixtures