Abstract:The effects of strain rate on the shear fracture behavior of Sn3.0Ag0.5CuiCu solder joints with thin and thick interfacial intermetallic compound layers were investigated. A single lap-shear sample was designed to conduct the study. The Cu/Sn3.0Ag0.5Cu/Cu joints were reflowed at 250 degrees C and 280 degrees C for 10 min, respectively, resulting in formations of a thin (6.08 mu m) and thick (13.25 mu m) intermetallic compound layer between the solder and Cu substrate. The single lap-shear tests were performed at the shear strain rates of 5 x 10(-4) s(-1), 5 x 10(-3) s(-1), 2 x 10(-2) s(-1), 1 x 10(-1) s(-1) and 2 x 10(-1) s(-1) to observe the shear fracture behavior. Experimental results revealed that both the thickness of the interfacial inter metallic compound layer and strain rate had influence on the shear strength and failure mode of the solder joint. The shear strength of the solder joints increased with increasing strain rate, but decreased with thickness of the interfacial intermetallic compound layer. It was observed that the solder joints broke in a ductile manner at low strain rates (5 x 10(-4) s(-1), 5 x 10(-3) s(-1)), although they exhibited a ductile-brittle mixed manner at intermediate (2 x 10(-2) s(-1)) and a brittle manner at high strain rates (1 x 10(-1) s(-1), 2 x 10(-1) s(-1)). In the case of low strain rates, the ductile fracture behavior of joints with thin and thick intermetallic compound layers were similar. Nevertheless, more cleavage and broken Cu6Sn5 grains were detected on the fracture surface of the solder joint with a thick intermetallic compound layer as the strain rate increased to 2 x 10(-2) s(-1), 1 x 10(-1) s(-1) and 2 x 10(-1) s(-1). Furthermore,, when the strain rate of 2 x 10(-1) s(-1) was applied, the solder joint with a thin intermetallic compound layer was completely broken inside the Cu6Sn5 layer, but partly broken at the Cu6Sn5/Cu3Sn interface for the joints with a thick intermetallic compound layer. Four modes were proposed to explain the detailed ductile-to-brittle transition in failure behavior. In addition, the strain rate sensitivities of the solder joints with thin and thick interfacial intermetallic compound layers were also investigated. It was found that the strain rate of a solder joint with a thick interfacial intermetallic compound layer was lower than that of one with a thin interfacial intermetallic compound layer. (C) 2016 Elsevier B.V. All rights reserved.

Effect of strain rate on mechanical behavior of lead-free solder joints

Experimental and Statistical Study of the Fracture Mechanism of Sn96.5Ag3Cu0.5 Solder Joints via Ball Shear Test

Effect of strain rate on interfacial fracture behaviors of Sn-58Bi/Cu solder joints

Mechanical Properties and Parameter Determination of Anand Viscoplastic Constitutive Model for Pb-free Solder Alloys

Shear Strength and Fracture Behavior of Reflowed Sn3.0ag0.5cu/Cu Solder Joints under Various Strain Rates

Experimental Determination of Mechanical Properties for Lead-Free Material SnAgCu

Characterization of Dynamic Behavior of Pb-free Material 95.7sn3.8ag0.5cu and Its Determination of Dynamic Constitutive Model Parameters

Fracture Behavior of Sn-3.5Ag-0.7Cu and Pure Sn Solders as a Function of Applied Strain Rate

An insight into dynamic properties of SAC305 lead-free solder under high strain rates and high temperatures

Shear Strengths and Fracture Behaviors of Cu/Sn37Pb/Cu Soldered Joints Subjected to Different Displacement Rates

Effects of aging time and temperature on shear properties of Sn–Zn and Sn–Ag–Cu solder joints

Effects of thermomechanical cycling on lead and lead-free (SnPb and SnAgCu) surface mount solder joints

The Effect Of Cu Orientation On Fracture Location In Cu3sn-Cu Interface Structure Under Monotonic Loading Condition By Molecular Dynamics Simulation

Reliability study of industry Sn3.0Ag0.5Cu/Cu lead-free soldered joints in electronic packaging

Fracture pattern evolution of SnAgCu–SnPb mixed solder joints at cryogenic temperature

Shear and Fatigue Properties of Lead-Free Solder Joints: Modeling and Microstructure Analysis

Contrastive Study on Shear Strength and Fracture Mechanism of Sn-9Zn-2.5Bi-1.5In and Sn-3.0Ag-0.5Cu Solder Joints with Aging Treatment

Effect of Ag Content on Microstructure and Mechanical Properties of Sn-xAg-0.5Cu Solder Joints under Rapid Thermal Shock

Microstructure evolution and mechanical properties of Sn-9Zn-2.5Bi-1.5In solder joints with aging treatment under various conditions

The Impact of Cooling Rate on the Tensile and Cyclic Stress-Strain Characteristics of Different Solder Alloys at Nanoscale

Shear Strength and Fracture Analysis of Sn-9Zn-2.5Bi-1.5In and Sn-3.0Ag-0.5Cu Pastes with Cu-substrate Joints under Different Reflow Times