Abstract:Electrochemical-mechanical coupling mechanism plays an important role in stress relaxation and cycle stability during charging and discharging of lithium ion batteries. The hollow core-shell structure has become a research hotspot in recent years due to the dual effects of its carbon layer and internal voids on volume expansion. However, the theory of diffusion induced stress has not been used to determine how the elastoplastic deformation of amorphous silicon affects the electrochemical performance of silicon anodes with more complex geometries. Based on the Cahn-Hilliard type of material diffusion and finite deformation, a fully coupled diffusion-deformation theory is developed to describe the electrochemical-mechanical coupling mechanism of silicon-polar particles. According to the interface reaction kinetics, the voltage response curve is obtained. The overall trend of the calculated results accords well with the experimental results, and the predicted stress response is also consistent with the experimental result, and thus verifying the effectiveness of the method. Taking the hollow carbon-coated silicon structure that has received much attention in recent years as an example, we study the electrochemical and mechanical behavior during lithiation of hollow carbon-coated silicon anodes and the capacity decay and stress evolution after charge and discharge cycles. The numerical simulation results show that the stress level of the hollow carbon-coated silicon electrode is significantly lower than that of the solid silicon electrode during the whole lithiation. With the lithiation, the stress difference becomes larger and the stress value at the end of lithiation is reduced by about 27%. It fully shows the dual effects of carbon layer and internal pores on stress relaxation and release. In addition, the concentration gradient in the solid silicon negative electrode is too large, which will result in greater stress. In contrast, the lithium ion concentration inside the hollow carbon-coated silicon particles during lithiation is significantly higher than that of the solid silicon particles, and tends to be evenly distributed, which conduces to alleviating the mechanical degradation of the electrode. At the same time, the hollow carbon coated silicon electrode reaches the fully lithiated state earlier, which fully shows the excellent electrochemical performance of the hollow core-shell structure. Finally, the numerical calculation shows that the capacity attenuation is quite consistent with the experimental measurements. Mitigation of stress levels under structural control delays the attenuation of the capacity of hollow carbon-coated silicon anodes. The excellent cycle stability can be attributed to the dual effect of carbon coating and internal pores on volume expansion and stress relief.

The Effects of Elastic Stiffening on the Evolution of the Stress Field Within A Spherical Electrode Particle of Lithium-Ion Batteries

Diffusion-induced Stress of Electrode Particles with Spherically Isotropic Elastic Properties in Lithium-Ion Batteries

A Coupled Electro-Chemo-Mechanical Model for Li-ion Batteries: Effect of Stress on the Voltage Hysteresis of Lithium Ion Batteries

Effects of Size and Concentration on Diffusion-Induced Stress in Lithium-Ion Batteries

Stress Fields in Hollow Core–shell Spherical Electrodes of Lithium Ion Batteries

Evolution of Electrochemically Induced Stress and Its Effect on the Lithium-Storage Performance of Graphite Electrode

The Influence of Stress-Dependent Overpotential on Dendrite Growth in All-Solid-state Battery with Cracks

Effect of Stress on Electrochemical Performance of Hollow Carbon-Coated Silicon Snode in Lithium Ion Batteries

Investigation into Diffusion Induced Plastic Deformation Behavior in Hollow Lithium Ion Battery Electrode Revealed by Analytical Model and Atomistic Simulation

Effects of external mechanical loading on stress generation during lithiation in Li-ion battery electrodes

Effects of particle shape and concurrent plasticity on stress generation during lithiation in particulate Li-ion battery electrodes

Progress in Simulating The Effect of Stress on The Performance of Lithium <SUP>-1</SUP>sodium-Based Batteries

The Coupling Effect of Surface Effect and Chemical Diffusion in Lithium-Ion Battery with Spherical Nanoparticle Electrodes

Stress Evolution in Lithium Metal Electrodes and the Impact of Artificial Passivating Layers

Effects of Surface Stress on Lithium-Ion Diffusion Kinetics in Nanosphere Electrodes of Lithium-Ion Batteries

Modified Stoney Model and Optimization of Electrode Structure Based on Stress Characteristics

Diffusion-Induced Stresses of Spherical Core-Shell Electrodes in Lithium-Ion Batteries: the Effects of the Shell and Surface/Interface Stress

Diffusion-Induced Stresses in Transversely Isotropic Cylindrical Electrodes of Lithium-Ion Batteries

Characterization of electrode stress in lithium battery under different factors

Analytical Modeling of Dislocation Effect on Diffusion Induced Stress in A Cylindrical Lithium Ion Battery Electrode

A Fully Coupled Mechano-Electrochemical Model for All-Solid-State Thin-Film Li-Ion Batteries with Non-Porous Electrodes: Effects of Chemo-Mechanical Expansions on Battery Performance and Optimization Strategies for Stress Evolution