Abstract:As an inherent attribute of asphalt pavement, texture durability is the essential reason for the change in skid resistance. However, different scale texture deterioration behavior remains unclear by tire wearing at present. To explore the influence of the durability of multi-scaled textures on skid resistance, nine pavement specimens were tested using the Harbin polishing and dynamic friction integrated experimental machine (HPFM). The pavement anti-skid texture tester (PATT-II) was used for high-precision texture scanning and reconstruction. The results show that the texture richness and skid resistance of the three types of pavements in 300 min polishing are ranked as Open-graded Friction Coarse (OGFC) > Stone Mastic Asphalt (SMA) > Asphalt Concrete (AC), while SMA presents the best durability, determined by the material skeleton structure of asphalt mixture. The macrotexture deterioration occurs slightly at first and then tends to stabilize in 300 min polishing. The micro-texture deterioration behavior is the same as the mu HPFM, increasing rapidly at the beginning, then slowly decreasing, and finally remaining constant. This deterioration is caused by the asphalt damage and continuously wearing aggregate surface. The 2D-PSD deterioration behavior is more significant with a smaller texture scale in 300min polishing, and the most considerable contribution wavelength in the microscopic scale range is 0.15 mm-0.3 mm, which is determined by the adhesion characteristics and molecular mechanism between a mineral mixture and asphalt material. The influence of pavement texture on the dynamic friction coefficient is significantly different under different water film thicknesses, the micro-texture and macro-texture play the main roles in boundary and mixed lubrication, respectively.

Influence of Different Polishing Conditions on the Skid Resistance Development of Asphalt Surface

Influence of temperature on polishing behaviour of asphalt road surfaces

Wear Behavior Analysis and Study on Skid Resistance on SMA Pavement

Evaluation of the Polishing Resistance Characteristics of Fine and Coarse Aggregate for Asphalt Pavement Using Wehner/Schulze Test

Development Of Aggregate Micro-Texture During Polishing And Correlation With Skid Resistance

Optimization of Long-Term Skid Resistance on Asphalt Concrete Pavement

Study on the Skid Resistance of Asphalt Pavement Covered with Spreading Chips

Effect of combined polishing and freeze-thaw conditioning on the skid resistance of road surface

Study on the Skid Resistance Deterioration Behavior of the SMA Pavement

Study on the Influence of Tire Polishing on Surface Texture Durability and Skid Resistance Deterioration of Asphalt Pavement

Influence of the gritting material applied during the winter services on the asphalt surface performance

Evaluating On The Skid Resistance Of The Aggregates Based On Mineralogy

Influence of Freeze–thaw on the Polishing Resistance of Coarse Aggregates on Road Surface

Effect of the Combined Traffic Load and Weathering on the Skid Resistance of the Aggregates for Road Surface

Research on the polishing process of aggregates on pavement surface on basis of mineral characteristics

A study of the laboratory polishing behavior of granite as road surfacing aggregate

Evaluation of Polishing Behavior of Fine Aggregates Using an Accelerated Polishing Machine with Real Tires

Evolution of texture and skid resistance change of high-friction surface due to differential-polishing undergoing simulated traffic wear

Comparison of the Polishing Resistances of Concrete Pavement Surface Textures Prepared with Different Technologies Using the Aachen Polishing Machine

Effect of applied gritting and de-icing agents in the course of winter services on the skid resistance development of asphalt pavement

Effect of Aggregate Properties on Long-Term Skid Resistance of Asphalt Mixture