Abstract:Reusable thermal protective system (TPS) plays a key role for protecting space vehicles against the aerothermal heating. Thus the characterization of TPS performance becomes an important issue in their production, processing and applications. This paper demonstrates the detection and imaging of inner disbond and thick defect, which considerably compromises the performance of TPS materials within a two-layer TPS configuration (a special designed thick heat insulation tile backed by an aluminum alloy plate). The methodology employed for this investigation is a near-field microwave non-destructive testing (NDT), encompassing both simulations and experimental study. A 3D microwave model for the two-layer TPS structure containing the specified defects was established, and the magnitude and phase of the waveguide input impedance (i.e. S-11 parameters) for each node within the X-band (8.2 similar to 12.4 GHz) frequency range were obtained in the work. The simulation results reveal distinct featured amplitude and phase images of defects at various frequencies. Correlation processing algorithms were employed to make the images dimensionally reduction and featured enhancement. Finally, the results were verified by experimental measurements using an open-ended rectangular waveguide. Interestingly, the disbond defect between the two layers could be clearly identified by the phase information after correlation processing algorithms. The proposed method appears to offer a contactless, intuitive, and effective approach for characterizing defects within TPS materials.

Defect Depth of Thermal Non-Destructive Testing for the Titanium Implants

High-resolution induction thermography for detection of micro-cracks in Ti-6Al-4V alloys

Sonic Infrared Nondestructive Evaluation of Microcracks in Titanium Alloy

Simulations and Experimental Study on Imaging of Thick Defect in Reusable Thermal Protective System Using Microwave NDT

Nondestructive Testing Of Subsurface Defects Measurements By Photothermaal Tomographic Imaging

Defect Depth Retrieval Method Based on Nonlinear Transformation for Pulsed Thermographic Inspection

Nondestructive Testing of Defects in Additive Manufacturing Titanium Alloy Components

Detecting of defects in heat-resistant alloy coating structure plates using pulsed infrared thermography

Accurate Depth Determination of Defects in Composite Materials Using Pulsed Thermography

A new method to evaluate the subsurface defect by thermal nondestructive testing

Lock-in Thermography for Evaluation of Destruction Area and Determination of Depth

Research on the Quantitative Analysis of Subsurface Defects for Non-Destructive Testing by Lock-In Thermography

Thermal pulse video thermography nondestructive testing of the defects in carbon steel

Quantitative Evaluation of Crack Depths on Thin Aluminum Plate using Eddy Current Pulse-Compression Thermography

Development and Application of Infrared Thermography Non-Destructive Testing Techniques

Pulse Phase Dynamic Thermal Tomography Investigation on the Defects of the Solid-Propellant Missile Engine Cladding Layer

Non-destructive Testing of Debonding Defects in Thermal Barrier Coating System Using Laser Infrared Thermography

Quantitative Characterization of Interfacial Defects in Thermal Barrier Coatings by Long Pulse Thermography

Non-Destructive Testing Using Eddy Current Sensors for Defect Detection in Additively Manufactured Titanium and Stainless-Steel Parts

Defect Visualization and Depth Quantification in Scanning Induction Thermography

Quantitative Detection of Defect Using Ultrasound Infrared Lock-In Thermography