Abstract:There exists internal connection between the process parameters and real sinter quality in the sintering process. However, few investigations on bridging the process parameters and real sinter quality for engineering applications were reported. For example, only process parameters (flow resistance, heat condition of sintering bed and off-gas composition) can be obtained by numerical method in the previous studies. Actual sinter strength and reducibility can’t be captured due to lacking of reliable models and the limited computing resource. This paper focused on solving the problem, which was substantial for parameters optimizing in both numerical simulation and on-line control of sinter quality. The melt quantity index (MQI), combining the peak temperature and duration time of melting temperature (DTMT), was used in this study. We also explained its physical significance as the effective “energy” for melting phase formation. Then the corresponding relation between MQI and sinter yield was widely confirmed by our own experimental data and the reproduced data from published references. Consequently, the MQI was recommended as a wise indicator of real sinter strength. The effects of three operating parameters (fixed carbon content, sintering pressure and fuel reactivity) on sinter strength were investigated by examining the MQI, sintering speed and air flowrate. Besides, the influencing mechanism of two important performance parameters (combustion and heat utilization efficiencies) on MQI was clarified. The monitoring of the above parameters would provide a powerful support for the transparency of sintering process “black-box” and optimization of operating parameters. Finally, a conceptual design for the on-line control of sinter strength was even proposed based on the present results.

Intelligent control of sintering mixture moisture based on RBF model of permeability

Intelligent Control for Moisture of Sinter Mixture Based on ABPM Artificial Neural Network

Research on Velocity Control in Precise Injection Molding Based on RBF Neural Network

Liquefied model analysis of fluorspar powder based on neural network

Optimization of sinter batching based on intelligent method of XGBoost and reverse adaptive population particle swarm optimization

RBFNN soft-sensor modeling of pellets sintering permeability based on subtractive clustering algorithm

Real-Time Control of Sintering Moisture Based on Temporal Fusion Transformers

Research Progress of Intelligent Ore Blending Model

Modeling and Control of Basis Weight and Moisture in Papermaking Process Using Artificial Neural Networks

Adaptive neural network controller for the molten steel level control of strip casting processes

Research on Compound Controller of Dynamic Batching in Sintering Process

Research and application of the sintering whole process intelligent manufacturing system

Application of artificial neural networks for prediction of sinter quality based on process parameters control

Predicting the Permeability of Pervious Concrete Based on the Beetle Antennae Search Algorithm and Random Forest Model

Research and development of the intelligent control of iron ore sintering process based on fan frequency conversion

Improvement in the Permeability of Sintering Beds by Drying Treatment after Granulating Sinter Raw Materials Containing Concentrates

Sinter Strength Evaluation Using Process Parameters under Different Conditions in Iron Ore Sintering Process

Effects of pellet-sinter interaction parameters on component segregation and bed porosity considering flow velocity and mixture composition: A DEM study

Nonlinear Mixed Control for Silicon Contents of Hot Metal in BF Ironmaking Processes

Mathematical Modeling of Closed-loop Intelligent Control for B.F Iron-making Process

The Estimation and Control of the Electroslag Remelting Melt Rate by Mechanism-Based Modeling