Abstract:Integrating nanostructured LiFePO 4 with carbon substrates is a feasible way to obtain high electrochemical performance for lithium-ion batteries (LIBs). The distribution uniformity of LiFePO 4 and contact surface area between LiFePO 4 and carbon substrates are crucial for the high electrode performance. In this work, LiFePO 4 thin film was synthesized on the flat surface of mechanically exfoliated multilayer graphene (MLG) via chemical deposition of Fe 2 O 3 thin film on MLG and conversion to LiFePO 4 by solid phase reaction. To enhance the electrochemical performance, carbon coating and Mn doping were carried out to modify the LiFePO 4 thin film. LiFe 0.95 Mn 0.05 PO 4 @C film on MLG (MLG/LiFe 0.95 Mn 0.05 PO 4 @C) exhibits high electrochemical performance. Based on the total mass of the composite, specific discharge capacity of 62.5 mAh g −1 is delivered at a high current density of 10 C. Specific discharge capacity of 126.8 mAh g −1 is maintained after 100 cycles at 0.2 C, exhibiting a capacity retention of 97.5%. This method is suitable for large-scale synthesis of carbon-based LiFePO 4 composites at low cost. Graphical LiFe 0.95 Mn 0.05 PO 4 @C film was successfully synthesized on the flat surface of mechanically exfoliated multilayer graphene (MLG). The "plane-to-plane" structure endows the composite high electrochemical performance as cathode of lithium ion battery.

Controllable synthesis of nano-LiFePO4 on graphene using Fe 2O3 precursor for high performance lithium ion batteries

Study of LiFePO4 Cathode Modified by Graphene Sheets for High-Performance Lithium Ion Batteries

Facile Synthesis of Nanocrystalline LiFePO4/graphene Composite As Cathode Material for High Power Lithium Ion Batteries

Synthesis of graphene-supported LiFePO4/C materials via solid-state method using LiFePO4(OH) as precursors

Graphene-encapsulated LiFePO4 Nanoparticles with High Electrochemical Performance for Lithium Ion Batteries

Graphene Oxide Sheets-Induced Growth Of Nanostructured Fe3o4 For A High-Performance Anode Material Of Lithium Ion Batteries

A simple solvothermal route to synthesize graphene-modified LiFePO 4 cathode for high power lithium ion batteries

In-situ synthesizing superior high-rate LiFePO 4 /C nanorods embedded in graphene matrix

A Facile Fabrication Of Fe3o4/Graphene Nanosheets For Lithium-Ion Battery

Fabrication of Lif/Fe/Graphene Nanocomposites As Cathode Material for Lithium-Ion Batteries

Desired Crystal Oriented Lifepo4 Nanoplatelets in Situ Anchored on A Graphene Cross-Linked Conductive Network for Fast Lithium Storage

Synthesis of -LiFeO<sub>2</sub>/Graphene nanocomposite via layer by layer self-assembly strategy for lithium-ion batteries with excellent electrochemical performance

Preparation of three-dimensional free-standing nano-LiFePO4/graphene composite for high performance lithium ion battery

LiFePO4 nanoparticles encapsulated in graphene nanoshells for high-performance lithium-ion battery cathodes.

3D Porous LiFePO4/graphene Hybrid Cathodes with Enhanced Performance for Li-ion Batteries

In-situ and Selectively Laser Reduced Graphene Oxide Sheets As Excellent Conductive Additive for High Rate Capability LiFePO4 Lithium Ion Batteries

Construction of Dual‐Carbon Co‐Modified LiFePO 4 Nanocrystals Via Microreactor Strategy for High‐Performance Lithium Ion Batteries

LiFe0.95Mn0.05PO4@C film grown on multilayer graphene as a cathode material for lithium-ion batteries

One-pot synthesis of ultrafine ZnFe2O4 nanocrystals anchored on graphene for high-performance Li and Li-ion batteries

The Production of Self-Assembled Fe2O3–graphene Hybrid Materials by a Hydrothermal Process for Improved Li-cycling

Porous graphene frame supported silicon@graphitic carbon via in situ solid-state synthesis for high-performance lithium-ion anodes