Abstract:Purpose - In high-speed processing, the influence on the machining accuracy of a machine tool is greatly caused by the thermal deformation of the motorized spindle; a further study on the thermal characteristics of the spindle is given in this paper. This study aims to reduce the thermal error and improve the performance of the machine tool by discussing the relationships between the temperature distributions and rotating accuracy caused by the thermal deformations of the spindle.Design/methodology/approach - The paper opted fora method combining the theoretical analysis and the experimental study to study the thermal stability of the high-speed motorized spindle. First of all, a finite element model of the spindle was built with ANSYS, whereby temperature distributions and the thermal deformations were successively obtained at different speeds. And then, both the temperature field and the rotating accuracy of the motorized spindle were measured simultaneously by the thermal stability experiment. Finally, the experimental and theoretical results were compared and validated.Findings - The thermal stability of the motorized spindle was studied in this paper, and some findings from the study were as follows: the spindle's rotating accuracy maintained good in X direction but bad in Y and Z directions in terms of the deformations; the higher front-end temperature of the spindle which can significantly affect the rotating accuracy is needed to be controlled mainly; the recovery speed of the spindle deformation lagged behind the temperature's fallback speed; the vibration graph about radial rotating sensitivity synthesized by X1 and X2 presented a trifoliate shape.Originality/value - Based on a built test-bed which can synchronously measure the motorized spindle's temperature distribution and rotating accuracy with five-point method, the coupling effects of the thermal deformation and temperature are embodied, and not only the vibration graph but also the thermal tilt angles can be gained. Therefore, considering the influence of the thermal deformation on the heat generated by the bearings, the paper fulfilled a study by which it was obtained that the front-end temperature of the spindle, which was higher and could significantly affect the rotating accuracy, needed to be controlled mainly.

Influence and Analysis of Temperature Rise to Principal Spindle's Rotating Error Test

Test and analysis of machine center's principal spindle dynamic errors

Test and Analysis of Machine Center's Principal Spindle Thermal Characteristics

Finite Element Analysis of Spindle Thermal Character Based on Thermal Contact Resistance

Test and research of vertical machine center′s dynamic errors

Theoretical Analysis And Experimental Study On Thermal Stability Of High-Speed Motorized Spindle

Analysis and Prediction for Spindle Thermal Bending Deformations of a Vertical Milling Machine

Thermal-structure Characteristics Coupling Analysis and Optimisation for Horizontal CNC Machining Centre Spindle

Study on Optimal Layout of Temperature Measurement for Thermal Errors of Spindle in Machine Tools

Simulation analysis of thermal characteristics of high-speed motorized spindle by using ANSYS

Study on the Influence of Machine Tool Spindle Radial Error Motion Resulted from Bearing Outer Ring Tilting Assembly

Heat exchange based finite element analysis of thermal errors in machine spindles

Modeling for Spindle Thermal Error in Machine Tools Based on Mechanism Analysis and Thermal Basic Characteristics Tests

Thermal Performance Analysis for the Machine Tool's Spindle

Simulation and Analysis of Thermal Errors of a Turning Center

Compensation for Spindle’s Axial Thermal Growth Based on Temperature Variation on Vertical Machine Tools

Temperature Change of Spindle Using Non-Contact Controllable Excitation and Response Measurement

Modeling and Compensation for Spindle's Radial Thermal Drift Error on a Vertical Machining Center

Thermal behavior analysis and thermal error compensation for motorized spindle of machine tools

Simulation, Experiment and Optimization for Thermal Characteristics of a Machine Tool Spindle System

Boundary conditions optimization of spindle thermal error analysis and thermal key points selection based on inverse heat conduction