Abstract:Wheel–rail adhesion is a complex tribological problem of wheel–rail rolling contact and is closely related to the operational safety of high-speed trains. A new design concept of high-speed trains was recently proposed with an expectation of a reduction of equivalent weight and total energy consumption by installing aerodynamic wings (aero-wings) on the roof, but it was accompanied by the disadvantage of deteriorating wheel–rail adhesion performance. In this study, a comprehensive multi-body dynamics (MBD) model of the high-speed train with predesigned aero-wings is established using the commercial software SIMPACK, in which the real aerodynamic characteristics of the train are taken into account. The available adhesion and adhesion margin are employed to evaluate the wheel–rail adhesion performance. The influences of aero-wing lift, train speed, and contact conditions on the wheel–rail adhesion level are discussed. The results show that the load transfer caused by the action of aerodynamic load and braking torque was the main reason for the inconsistent adhesion condition of four wheelsets. The influences of aero-wing lift and train speed on the wheel–rail adhesion performance are coupled; the available adhesion of both motor car and trailer is negatively correlated with aero-wing lift and train speed under all contact conditions, while the variation law of adhesion margin with train speed shows differences under different contact conditions. When the wheel–rail interface was polluted by a 'third-body medium' such as water and oil, the wheel–rail adhesion performance was dramatically reduced and the wheelset tended to reach adhesion saturation and slide. However, track irregularity had little effect on the adhesion performance and could be ignored to save calculation time. These results are of positive significance for reducing the wheel idling or sliding phenomenon and to ensure the safe operation of high-speed trains with aero-wings.

Study of the Force Transferring Model Considering Wheel-Rail Interaction of EMU

Re-adhesion Optimization Control Strategy for Metro Traction

Research on Coordinated Control Method of PMSMs Traction System in EMU Train

Research on wheel-rail dynamic interaction of high-speed railway under low adhesion condition

Load Modeling of CRH3 Electric Multiple Unit Traction Drive System

Experimental investigation of high-speed wheel-rail adhesion under large creepage and water conditions

Comparison of the re-adhesion control strategies in high-speed train

Investigating the stick-slip vibration behavior of a locomotive with adhesion control in a curve

Research of Direct Torque Control on Traction Drive System of CRH3 EMU

Train energy simulation with locomotive adhesion model

A comprehensive wheel–rail contact model incorporating sand fragments and its application in vehicle braking simulation

Numerical study of wheel–rail adhesion performance of new-concept high-speed trains with aerodynamic wings

A transient three-dimensional wheel-rail adhesion model under wet condition considering starvation and surface roughness

A 4-Phase Combined Adhesion Threshold Algorithm for Wheel Slide Protection Systems in Rail Vehicles

Wheel/rail Contact Performance on Curved Track of High-speed EMU with Elastic Model

Real-time wheel–rail friction coefficient estimation and its application

Influence of Driving Equipment Flexibly Suspended on Frame on Dynamic Performance of High-Speed EMU

Analysis of Traction Reflux Characteristics of EMU and Improvement of Its Protective Grounding System

Wheel-rail contact and friction models: A review of recent advances

Wheel/rail adhesion and analysis by using full scale roller rig

Improving the performance of finite element simulations on the wheel-rail interaction by using a coupling strategy