Abstract:Partial discharge (PD) detection from protrusion defects is performed in an actual gas-insulated switchgears (GISs) based on a built-in sensor integrated with fluorescent fiber and ultrahigh frequency (UHF) antenna. The characteristics of both optical and UHF signals are analyzed in terms of inception voltage, pulse distribution, and statistical characteristics including the phase-resolved partial discharge (PRPD) pattern and PD number. In the experiment, protrusions with different curvatures are adopted to investigate the reason for the differences in the characteristics of UHF and optical signals. The results show that UHF and optical methods have different detection sensitivity for different discharge types owing to the different energies of electromagnetic waves and optical signals radiated in different discharge types. The optical method can easily detect avalanche discharge, while the UHF method can easily detect streamer discharge. This difference leads to the difference of the PD characteristics obtained by the two partial methods. For example, for the PD of small curvature protrusions, the PD inception voltage (PDIV) of the optical method is lower than that of the UHF method, because the defect triggers avalanche discharge. Moreover, the optical and UHF signal pulses are not always simultaneous in the time domain because they detect different discharge types. The PRPD patterns obtained by the optical method have a wider phase distribution than the UHF method because the optical method can detect avalanche discharge under low voltage.

Time-Frequency Characteristics of Partial Discharge of SF6 Gas in an Extremely Uneven Field under Impulse Voltage

Partial discharge diagnosis by simultaneous observation of discharge pulses and vibration signal

The Study of Partial Discharge in GIS under Impulse Voltage Based on Time-Frequency Analysis

Partial Discharge Characteristics of Surface Defect in SF 6 Under Oscillating Impulse Voltage

Characteristics and Development Mechanisms of Partial Discharge in Sf6 Gas under Impulse Voltages

Partial Discharge Characteristics of Typical Defect of SF6 Gas Insulation Under Impulse Voltage

Partial Discharge Detection in Gas-Insulated Switchgears Using Sensors Integrated with UHF and Optical Sensing Methods

Time-frequency Analysis of Partial Discharge for GIS Using the Theory of Reassignment Distribution

Partial Discharge Characteristics over Sf6/Epoxy Interfaces under Impulse Voltage

Analysis of Partial Discharge in GIS under Impulse Voltage by Using Quadratic Short-time Fourier Transform

Characteristics of the Partial Discharge in the Development of Conductive Particle-Initiated Flashover of a GIS Insulator

Relationship Between Time-Frequency Representation of PD-induced UHF Signal and PD Current Pulse

Partial Discharges in SF6 Gas Filled Void under Standard Aperiodic and Oscillating Switching Impulses

Partial Discharges in SF6 Gas Filled Void under Standard Oscillating Lightning and Switching Impulses in Uniform and Non-Uniform Background Fields

Study on the Partial Discharge Characteristics and Development Process in Use of the Multiple Discharge Patterns for the Typical Defects in Gas-Insulated Switchgear

Multispectral Light Pulse Detection On Partial Discharges Initiated By Metal Particle On Insulator In Sf6 Gas

Partial Discharge Signal Analysis Using Reassigned Time Frequency Transform for Gis

Investigation of Frequency Characteristics of Typical PD and the Propagation Properties in GIS

Partial Discharges in Void Defect of Gas Insulated Switchgear Insulator under Standard Aperiodic and Oscillating Switching Impulses

Partial Discharge Characteristics and Development Process of GIS Insulator with Diverse Defects

Propagation Attenuation Properties of Partial Discharge in Typical In-Field GIS Structures