Abstract:This study presents numerical investigations on the performance of the charging process of a metal hydride-based hydrogen storage tank. Three scenarios were developed to examine the absorption performance and compare the effectivenesses of proposed thermal management alternatives. In Scenario-1, the metal hydride (MH) tank is cooled with convective heat transfer on the lateral surface of the tank, i.e., external convection. In Scenario-2, phase change material (PCM) is wrapped around the MH tank to investigate passive thermal management. Scenario-3, a hybrid approach, includes the PCM layer and an internal cooling pipe. In this scenario, the heat transfer fluid (HTF) inside the tube is activated depending on the temperature within the MH tank. An in-house 2D axisymmetric numerical code was developed using the finite volume approach in MATLAB software. In the parametric study, several design parameters and operating conditions were selected, such as (i) charging pressure, (ii) external convective heat transfer coefficient, (iii) PCM thickness, (iv) latent heat of PCM, (v) HTF temperature, and (vi) convective heat transfer coefficient of the HTF, and as a total of 334 parametric analyses were conducted by varying the numerical values of the parameters chosen in wide ranges. The outputs, like spatial and temporal variations of hydride bed temperature and weight fraction, are evaluated for each of the proposed scenarios. As a result, it was observed that the storage performance strongly depends on the convection coefficient at ambient conditions. In Scenario-1, beyond 1000 W/m2K, convective heat transfer coefficient variations do not cause a significant change in the charging process. In Scenario-2, variations in PCM thickness do not cause a considerable change in the storage performance significantly beyond 3 cm. The variations in PCM thickness become important at lower latent heat values and PCM thicknesses less than 2.5 cm. In Scenario-2 and Scenario-3, PCM thickness over 2.5 cm and latent heat of fusion parameter over 150 kJ/kg should be selected to provide a thermal management strategy to be implemented. While the storage criteria were determined according to different thermal management strategies, the PCM thickness and latent heat of fusion parameters showed higher storage performance than the external convection coefficient at the same charging pressure. Temperatures at critical nodes in the MH-PCM system vary depending on location and reaction time. For all thermal management strategies in the hydride bed in positional temperature distributions, the temperature is minimum at the nodes close to the straight pipe. In the scenario-based analysis of the hydride bed temperature, the Scenario-3 thermal management strategy provides the MH bed domain at a lower temperature than Scenario-2. Here, the convection coefficient inside the cooling channel is a critical parameter for the hydride bed temperature.

Study on Heat and Mass Transfer Symmetry Characteristic of Metal Hydride Thermal Compressor During Absorption/Desorption Process

Simulation study on the reaction process based single stage metal hydride thermal compressor

Numerical Investigation of Heat Transfer Characteristics in a Shell- And-Tube Latent Heat Thermal Energy Storage System

Optimization of Heat Transfer Device and Analysis of Heat & Mass Transfer on the Finned Multi-Tubular Metal Hydride Tank

Numerical investigation of metal hydride heat storage reactor with two types multiple heat transfer tubes structures

Vapor−Liquid Equilibrium Study of an Absorption Heat Transformer Working Fluid of (HFC-32 + DMF)

Investigation on the Influences of Heat Transfer Enhancement Measures in a Thermally Driven Metal Hydride Heat Pump

Effects of Different Heat Transfer Conditions on the Hydrogen Desorption Performance of a Metal Hydride Hydrogen Storage Tank

Investigations on the Cycle Performance of a Diffusion Absorption Heat Transformer Using HCOOK As an Alternative to LiBr

Numerical Study on Hydrogen and Thermal Storage Performance of a Sandwich Reaction Bed Filled with Metal Hydride and Thermochemical Material

Modeling Heat and Mass Transfer in Metal Hydride-Based Hydrogen Storage Systems Using the Finite Volume Method

Identifying Heat and Mass Transfer Characteristics of Metal Hydride Reactor During Adsorption: Improved Formulation about Parameter Analysis

Identifying Heat and Mass Transfer Characteristics of Metal Hydride Reactor During Adsorption—parameter Analysis and Numerical Study

Optimization on Distribution of High Thermal Conductivity Materials in Metal Hydride Reactor for Improving Heat Transfer Performance

Improvement in hydrogen desorption performances of magnesium based metal hydride reactor by incorporating helical coil heat exchanger

Numerical Simulation on Heating Effects during Hydrogen Absorption in Metal Hydride Systems for Hydrogen Storage

Design and Process Simulation of Metal Hydride Reactors

Numerical investigation of the heat-release performance of a metal hydride reactor-integrated phase change material

Numerical investigations on the absorption of a metal hydride hydrogen storage tank based on various thermal management strategies

Effect of partition arrangement of metal hydrides and phase change materials on hydrogen absorption performance in the metal hydride reactor

Heat Transfer Optimization for MH Reactor Using Combined Taguchi Design and Data-Driven Optimization Method