Expansion Properties and Microstructure Characterization of Cement Paste Mixed with Reactive MgO

朱静,叶楠,杨家宽
DOI: https://doi.org/10.3963/j.issn.1671-4431.2013.08.004
2013-01-01
Wuhan Ligong Daxue Xuebao/Journal of Wuhan University of Technology
Abstract:Shrinkage or expansion properties of cementitious material during the hydration are determined by the nature of the hydration products. Variations of shrinkage during the curing ages reflect the cement hydration reaction characteristics. The properties of hydration products and the expansion ratio of MgO cement, reactive MgO mixed with OPC paste in the hydration process are studied. Reactive MgO was prepared by magnesite calcined at 700°C for 2.5 h. The soundness of cement paste mixed with 8% reactive MgO was stability, for cement paste with 12% reactive MgO was instability. Increase the addition of MgO from 4% to 20%, expansion ratio increased from 1.88 ‰ to 10.05 ‰ in 20°C water. The pore volume of pure cement paste for 90 d in 20°C water is 0.018 cm3/g, and reactive MgO increases the pore volume of cement paste. Increase the addition of MgO from 8% to 12%, the pore volume of the paste for 90 d in 20°C water reduced from 0.079 cm3/g to 0.030 cm3/g for blocking the aperture by hydration product Mg(OH)2. Pore size distribution range of 12% MgO cement paste was mainly between 2~100 nm. It is wider than that of 8% MgO cement paste, and the pore size differential distribution increases. According to the results of hydration reaction products, morphology characterization, pore analysis and expansion ratio, stability problems of cement paste caused by reactive MgO can be well explained.
What problem does this paper attempt to address?