Abstract:As the range of applications for fiber-reinforced polymer (FRP) composite materials in civil engineering constantly increases, there is more and more concern with regard to their performance in critical environments. The fire behavior of composite materials is especially important since complex physical and chemical processes such as the glass transition and decomposition occur when these materials are subjected to elevated and high temperatures, possibly leading to considerable loss of stiffness and strength. This stiffness and strength degradation in composite materials under elevated and high temperatures is the result of changes in polymer molecular structures. When polyester thermosets are subjected to elevated and high temperatures, they undergo three transitions (glass transition, leathery-to-rubbery transition, and rubbery-to-decomposed transition), corresponding to four different states (glassy, leathery, rubbery and decomposed). At a certain temperature, a composite material can therefore be considered as a mixture of materials that are in different states. As the content of each state varies with temperature, the composite material exhibits temperature-dependent properties. Since these changes in state can be described using kinetic theory, the quantity of material in each state can be estimated and the thermophysical and thermomechanical properties of the mixture can thus be determined. These concepts formed a basis for the development of thermophysical and thermomechanical property sub-models for composites at elevated and high temperatures and even for the description of post-fire status. Incorporating these thermophysical property sub-models into a heat transfer governing equation, thermal responses were calculated using a finite difference method. Integrating the thermomechanical property sub-models within structural theory, the mechanical responses were described using a finite element method and the time-to-failure was also predicted by defining a failure criterion. The modeling results for temperature responses, mechanical responses and post-fire behavior were compared with those obtained from structural endurance experiments on full-scale cellular GFRP (glass fiber-reinforced polymer, in this case polyester resin) panels subjected to a four-point bending configuration and fire from one side. The modeling results for time-to-failure were compared with those from the experiments carried out on GFRP tubes under combined compressive and thermal loadings. In each experimental setup, two different thermal boundary conditions were investigated – with and without water cooling through specimen cells – and good agreement was found. The understanding gained and modeling of the behavior of GFRP composites under elevated and high temperatures carried out in this thesis could be applicable for different composite materials, and also benefit investigations regarding both active and passive fire protection techniques in order to improve the fire resistance of structures made of such materials.

High Temperature Thermomechanical Behavior of Silica-Phenolic Composite Exposed to Heat Flux Environments

Modeling of Coupled Temperature-Displacement-Diffusion Problem for Silica-Phenolic Composite under High Temperature

Comparison of the in situ compressive behavior of carbon fibers woven ply laminates exposed to one‐sided heat flux: Thermoplastic versus thermosetting composites

Three-dimensional Modeling and Experimental Validation of Thermomechanical Response of FRP Composites Exposed to One-Sided Heat Flux

Thermal Decomposition Behavior of Silica-Phenolic Composite Exposed to One-Sided Radiant Heating

Degradation in compressive strength of silica/phenolic composites subjected to thermal and mechanical loading

Thermal Degradation and Flammability of Nanocomposites Composed of Silica Cross-Linked to Poly(Methyl Methacrylate)

Modeling of One-Dimensional Thermal Response of Silica-Phenolic Composites with Volume Ablation

Material and Structural Performance of Fiber-Reinforced Polymer Composites at Elevated and High Temperatures

Research on high-temperature mechanical behaviour of carbon/phenolic composites under ultra-high heating rates

Surface and Volumetric Ablation Behaviors of Sifrp Composites at High Heating Rates for Thermal Protection Applications

A Mesomechanical Model for Predicting the Degradation in Stiffness of Frp Composites Subjected to Combined Thermal and Mechanical Loading

Molecular dynamics simulations of thermomechanical properties of silicone-modified phenolic polymer

Thermal Decomposition Behavior of a Thermal Protection Coating Composite with Silicone Rubber: Experiment and Modeling

Evaluation of the Effective Properties of High Silica/Phenolic Composite under Volumetric Ablation Condition

INVESTIGATION OF THE THERMO-MECHANICAL PROPERTIES OF THERMALPROTECTIVE COMPOSITES UNDER HIGH TEMPERATURE

Investigation on Thermal Conductivities of Plain-woven Carbon/Phenolic and Silica/Phenolic Composites at High Temperature: Theoretical Prediction and Experiment

Investigation of the thermal degradation kinetics of ceramifiable silicone rubber-based composite

Computational Micromechanics for High-Temperature Constitutive Equations of Polymer-Matrix Composites With Oxidation Reaction, Damage, and Degradation

Ablation Mechanism and Properties of Silica Fiber-Reinforced Composite Upon Oxyacetylene Torch Exposure

Effect of high temperature on mechanical and thermal properties of polysiloxane composites