Abstract:The dynamic analysis of a generalized linear elastic body undergoing large rigid rotations is investigated. The generalized linear elastic body is described in kine-matics through translational and rotational deformations, and a modified constitutive relation for the rotational deformation is proposed between the couple stress and the curvature tensor. Thus, the balance equations of momentum and moment are used for the motion equations of the body. The floating frame of reference formulation is applied to the elastic body that conducts rotations about a fixed axis. The motion-deformation coupled model is developed in which three types of inertia forces along with their incre-ments are elucidated. The finite element governing equations for the dynamic analysis of the elastic body under large rotations are subsequently formulated with the aid of the constrained variational principle. A penalty parameter is introduced, and the rotational angles at element nodes are treated as independent variables to meet the requirement of C1 continuity. The elastic body is discretized through the isoparametric element with 8 nodes and 48 degrees-of-freedom. As an example with an application of the motion-deformation coupled model, the dynamic analysis on a rotating cantilever with two spatial layouts relative to the rotational axis is numerically implemented. Dynamic frequencies of the rotating cantilever are presented at prescribed constant spin velocities. The maximal rigid rotational velocity is extended for ensuring the applicability of the linear model. A complete set of dynamical response of the rotating cantilever in the case of spin-up maneuver is examined, it is shown that, under the ultimate rigid rotational velocities less than the maximal rigid rotational velocity, the stress strength may exceed the material strength tolerance even though the displacement and rotational angle responses are both convergent. The influence of the cantilever layouts on their responses and the multiple displacement trajectories observed in the floating frame is simultaneously investigated. The motion-deformation coupled model is surely expected to be applicable for a broad range of practical applications.

THE MOTION STABILITY ANALYSIS OF A ROTATING BEAM WITH A RIGID BODY ON ITS END

Exponential stability of a non-homogeneous rotating body-beam system with variable coefficients

An improved stability matrix for Co-rotational formulation

Exponential Stability of a Non-Homogeneous Rotating Disk–beam–mass System

Dynamic modelling and analysis of a rotating flexible beam

Kinematic Stability of Variable Cross-section Beam with Large Deformation by Using the Absolute Nodal Coordinate Formulation

Stability of Nonlinear Motion of a Rigid-Flexible Coupled System

Analysis on Existence of New Stable Attitude of Spatial Flexible Damping Beam

Nonlinear Dynamic Modeling, Instability and Post-Buckling Analysis of A Rotating Beam with A Flexible Support

The Stability of Geometric Nonlinear Vibrations of a Deploying Flexible Appendage of a Spacecraft

Stability of Nonlinear Vibrations of a Deploying Flexible Beam

Study on Motion Stability of Variable Cross-Section Flexible Beams Based on the Absolute Nodal Coordinate Formulation

A Study on Dynamic Stiffening of a Rotating Beam with a Tip Mass

DYNAMICS AND STABILITY ANALYSIS OF AN AXIALLY MOVING BEAM IN AXIAL FLOW

An Analysis of the Stability of an Asymmetrical Rotor-bearing System

Stability analysis of rotating beams rubbing on an elastic circular structure

An Exact Dynamic Stiffness Method for Multibody Systems Consisting of Beams and Rigid-Bodies

Nonlinear Dynamic Analysis of a Flexible Rod Fastening Rotor Bearing System

Vibration and stability of an axially moving beam immersed in fluid

Dynamic Analysis on Generalized Linear Elastic Body Subjected to Large Scale Rigid Rotations

Dynamics of Three-Dimensional Beams Undergoing Large Overall Motion