Abstract:The present work proposes an enhanced method of investigation and optimization photovoltaic (PV) modules by approaching and using MPPT (Maximum Power Point Tracking) technique to improve their output power. The performance of the PV panels is strongly influenced by the operating conditions, especially regarding the solar irradiance, temperature, configuration, and the shading (due to a passing cloud or neighboring buildings); all these cause, both on energy conversion loss, and further on non-linearity of the I-V characteristics. From this reason, the present study could have a high relevance based on the improvement of the performances (including the efficiency) of the shaded photovoltaic panels and would quantify the impact of a complex approach represented by numerical modeling and experimental validation. For a better understanding of these issues determined by partial shading, and improvement of MPP tracking, it is required to study the behavior of individual panels. For the best accuracy of the implemented models a comparative analysis and optimized method of the PV modules was considered based on: (1) the influence of temperature and solar irradiance and behavior of the PV modules in partial shading conditions; (2) a comparison between the optimized output power of four algorithms (FLC—Fuzzy Logic Controller, P&O—Perturb and Observe, IncCond—Incremental Conductance and RC Ripple Correlation) and the selection of the best one (FLC); (3) discussion of customized/improved fuzzy logic controller (FLC) algorithm on five operation points introduced in order to increase PV module efficiency under fluctuating weather conditions and rapidly changing uncertainties. Furthermore, the FLC provides a set of rules useful for predicting the current-voltage behavior and the maximum power points of shaded photovoltaic modules. This FLC algorithm was implemented in a specialized software, namely MATLAB/Simulink. The authors highlighted the development and implementation of a numerical simulation model for an advanced PV module to determine its behavior under different operating conditions and improve its performance. The essence of the authors' research and the motivation of this work is described. The authors were able to stabilize and improve the output performance of the PV module. The results concerning the shading effect as well as the shading patterns were developed, demonstrated, and experimentally validated. These results could be applied for the actual photovoltaic installations, respectively complex stand-alone or grid-connected photovoltaic systems.

A novel solar panel optimizer with self-compensation for partial shadow condition

Design and Analysis of a Parallel Single-Switch Panel-Integrated PV Optimizer

Composite MPPT Control Algorithm with Partial Shading on PV Arrays

High-Performance Global Maximum Power Point Tracking for Partial Shaded Photovoltaic Systems

A Step-Down Partial Power Optimizer Structure for Photovoltaic Series-Connected Power Optimizer System

Analysis of Unified Output MPPT Control in Sub-Panel PV Converter System

A Simple Mismatch Mitigating Partial Power Processing Converter for Solar PV Modules

Fault Tolerance Enhancement of the PV Module System by Improving the Topology and Control Strategy

Optimization design of solar module based on intelligent bypass diode under shadow effect

Application of Unified Output MPPT Control in DMPPT PV Systems

A Novel Methodology for Partial Shading Diagnosis Using the Electrical Parameters of Photovoltaic Strings

Intrinsic-Capacitance-based Differential Power Processing for Photovoltaic Modules

A Simple Global Maximum Power Point Tracking Scheme with Region Segmentation for Partially Shaded PV Modules

Different Techniques to Mitigate Partial Shading in Photovoltaic Panels

Investigation of the Partial Shading Effect of Photovoltaic Panels and Optimization of Their Performance Based on High-Efficiency FLC Algorithm

A novel on design and implementation of hybrid MPPT controllers for solar PV systems under various partial shading conditions

A novel design and analysis of hybrid fuzzy logic MPPT controller for solar PV system under partial shading conditions

Topology and control strategy of power optimisation for photovoltaic arrays and inverters during partial shading

An Overall Distribution Particle Swarm Optimization MPPT Algorithm for Photovoltaic System Under Partial Shading

Optimal Design of Photovoltaic Arrays under Partial Shading

Switched-Capacitor-Inductor-based Differential Power Converter for Solar PV Modules