Compact circularly polarized metasurface antenna based on characteristic mode analysis
Qing Wang,Xiaopeng Lei,Xiaohai Han,Zhiwei Ge,Zhenya Lei
DOI: https://doi.org/10.1049/ell2.70057
2024-10-31
Electronics Letters
Abstract:This article introduces a novel, single‐layer, low‐profile, circularly polarized metasurface antenna. Through characteristic mode analysis, the optimization of a 3× 3 rectangular metasurface structure was performed. Two orthogonal modes were selected as the operating modes, and improvements to the metasurface structure were made to achieve a 90∘ phase difference between these modes. The adoption of a coplanar waveguide structure enables the excitation of the metasurface, facilitating circularly polarized radiation performance for the two selected modes. The antenna's dimensions are 40 mm × 40 mm × 3 mm, featuring a −10 dB impedance bandwidth of 27.8% (4.49–5.94 GHz). The 3 dB axial ratio bandwidth is 14.2% (5.25–6.05 GHz), with a maximum gain of 7.26 dBi. This article introduces a novel, single‐layer, low‐profile, circularly polarized metasurface antenna. Through characteristic mode analysis, the optimization of a 3× 3 rectangular metasurface structure was performed. Two orthogonal modes were selected as the operating modes, and improvements to the metasurface structure were made to achieve a 90∘ phase difference between these modes. The adoption of a coplanar waveguide structure enables the excitation of the metasurface, facilitating circularly polarized radiation performance for the two selected modes. The antenna's dimensions are 40 mm × 40 mm × 3 mm (0.67 λ × 0.67 λ × 0.05 λ ), featuring a −10 dB impedance bandwidth of 27.8% (4.49–5.94 GHz). The 3 dB axial ratio bandwidth is 14.2% (5.25–6.05 GHz), with a maximum gain of 7.26 dBi.
engineering, electrical & electronic