Abstract:In the existing fragility assessment, most bridges are short-span bridges and a few bridges have long spans such as cable-stayed bridges. In this study, a procedure is proposed to conduct the component and system seismic fragility analysis of long-span cable-stayed bridges. Three critical issues are addressed in the procedure: (1) the optimal intensity measure of cable-stayed bridges, (2) limit state models of various components, and (3) contribution of individual components to the entire system failure of bridges. This study chooses a long-span cable-stayed bridge with the most common configuration in China and builds the numerical model of its multiple components using OpenSEES that can account for their nonlinear response and uncertainties in the ground motion and material properties. Four typical intensity measures are compared with respect to four characteristic properties including efficiency, practicality, sufficiency, and proficiency. Peak ground velocity turns out to be the optimal intensity measure. Limit states of pylon sections are derived by a numerical simulation based on pushover analysis and China’s guidelines. The pushover results indicate that the limit state of their section curvature depends highly on the section type and axial compression coefficient. A joint probabilistic seismic demand model and Monte Carlo simulation are employed to obtain an accurate system fragility estimate of cable-stayed bridges by accounting for the contribution of each component to the overall bridge system. The system fragility curves based on Monte Carlo simulation lie much closer to the upper bound fragilities given small correlation coefficients, implying that seismic demands of various components conditioned on the peak ground velocity are not correlated.

Influence of rubber buffer devices on collision between a cable-stayed bridge and its approach span

EFFECTS OF LOCAL CABLE VIBRATION ON THE SEISMIC RESPONSE OF CABLE-STAYED BRIDGES

Seismic Damage of Long Span Steel Tower Suspension Bridge Considering Strong Aftershocks

SEISMIC RESPONSE ANALYSIS OF CABLE-STAYED BRIDGES USING CARBON FIBER COMPOSITE CABLE

Dynamic Responses of Cable-Stayed Bridges to Vehicular Loading Including the Effects of the Local Vibration of Cables

Effect of Rail Restraints on Seismic Responses of Cushioning Railway Bridges

Dynamic characteristics and seismic response analysis of cable-stayed bridges taking into account cable lateral vibration

Earthquake response of bridges bearing on flexible rubber considering pounding of girders

Analysis of Effect of Unseating Prevention Devices on the Collision of Cable-stayed Bridge and Approach Span

NONLINEAR VIBRATION OF STEEL AND CFRP CABLES OF LONG SPAN CABLE-STAYED BRIDGE UNDER VEHICULAR LOADS

Seismic Study of an Isolated Cable-Stayed Bridge under Near-Fault Ground Motions

Evaluation of Seismic-induced Impact Interaction between a Cable-stayed Bridge and Its Approach Spans Using a Simplified Analysis Model

SEISMIC DESIGN METHOD OF SMALL AND MEDIUM SPAN BRIDGE CONSIDERING BEARING FRICTION SLIPPING

Research on Optimization of Shock Absorption Design of the Self-Anchored Cable-Stayed Suspension Bridge

Research on Seismic Response of Single-Tower Cable-Stayed Bridge Across Faults

Application of Structural Damage Control in Seismic Performance Optimization of Long-span Cable-stayed Bridge

Experimental and numerical investigation on seismic performance of novel cable-restraining composite rubber bearings for highway bridges

Impact analysis of cable-stayed bridges

Time-Progressive Dynamic Assessment of Abrupt Cable-Breakage Events on Cable-Stayed Bridges

Influence of near-fault ground motion characteristics on the seismic response of cable-stayed bridges

Seismic fragility assessment of long-span cable-stayed bridges in China