Abstract:In the evaluation of existing structures with known lateral strength, the displacement ratio spectra of constant yielding strength that provide inelastic displacement ratios to estimate maximum lateral inelastic displacement demands on existing structures from maximum elastic displacement demands are particularly useful. A statistical study are performed of inelastic displacement ratio computed for SDOF systems with different levels of lateral yielding strength normalized to strength required to remain elastic when subjected to a large number earthquake accelerations. The constant-relative-strength inelastic displacement ratio spectra corresponding to rock, stiff soil, medium soil, soft soil site conditions are presented and the influences of record intensity, site conditions, period of vibration, level of lateral strength on the spectra are discussed. It is concluded that whether the intensity of a record is high or low, as long as the relative lateral yielding strength is equivalent, the constant-relative-strength inelastic displacement ratio spectra of the record are the same. And it also reveals that site conditions, yield strength level and period of structures have important effects on the inelastic spectra and for different relative lateral yielding strength, the effects of site conditions on spectra are different. In addition, the limiting period that divides the short-period spectral region where spectra are strongly dependent on period and the long-period spectral region where spectra tend to be constant is not only the function of site conditions but also depends on the relative lateral yielding strength. Finally, an new experimental expression of constant-relative-strength inelastic displacement ratio spectra from non-linear regression is developed, which permits the estimation of maximum inelastic displacement demands of the existing structures with known lateral strength built on different site conditions from maximum elastic displacement demands and has been recommended to adopt in seismic design code.

Numerical and Comparative Study of Earthquake Intensity Indices in Seismic Analysis

A New Index for Evaluating Liquefaction Resistance of Soil under Combined Cyclic Shear Stresses

Some Considerations On The Physical Sure Of Seismic Intensity

A study on seismic performance levels of building structures

Some Considerations on the Physical Measure of Seismic Intensity

Study on Strength Reduction Factors Consid-Ering the Effect of Classification of Design Earthquake

Ground-Motion Intensity Measures for the Seismic Response of the Roof-Isolated Large-Span Structure

Comparative study on methods of selecting earthquake ground motions for nonlinear time history analyses of building structures

Study on Physical Measure of Seismic Intensity Based on Damage to Masonry Structures

Improved seismic intensity measures and regional structural risk estimation models

Ranking Method of the Severest Input Ground Motion for Underground Structures Based on Composite Ground Motion Intensity Measures

Optimal earthquake intensity measure in probabilistic seismic demand models of underground subway station structure

Preliminary assessing of seismic intensity for main regions Subjected to Chi-Chi earthquake

Construction and Verification of Composite Intensity Measures for Multi-Storey Underground Structures Based on Partial Least Squares Regression Method

An Approach to Develop Compound Intensity Measures for Prediction of Damage Potential of Earthquake Records Using Canonical Correlation Analysis

A Study on Constant-Relative-strength Inelastic Displacement Ratio Spectra for Evaluation of Existing Structures

Energy-based seismic design: Needs of energy damage index values for serviceability and ultimate limit states for gravity design buildings?

Study on the Severest Real Ground Motion for Seismic Design and Analysis

Identifying the optimal intensity measure and key factors of earthquake liquefaction-induced uplift of underground structures

Seismic Vulnerability Assessment Indices for Buildings: Proposals, Comparisons and Methodologies at Collapse Limit States

Evaluation of Ground Motion Damage Potential with Consideration of Compound Intensity Measures Using Principal Component Analysis and Canonical Correlation Analysis