Abstract:Woven composite has been increasingly employed in engineering applications undergoing complex loading conditions. For effective use of composite materials, it is essential to fully understand the mechanical behaviour of composite at different strain rates. In the present study, both in-plane tensile and compressive mechanical properties of a carbon/glass hybrid plain weave composite were experimentally investigated over the strain rate range from 0.001 to 1000 s(-1). High strain rate tests were carried out using Split Hopkinson Pressure and Split Tensile Bar apparatuses, respectively. Experiments were performed at the axial direction of 0 degrees and 90 degrees, and the off-axial direction of 45 degrees considering the tension/compression asymmetry and anisotropy characteristic. The results indicated that the in-plane mechanical performance was strain rate sensitive under both tensile and compressive loadings. Highly direction-dependent and tension/compression asymmetric characteristic was observed under quasi-static and high strain rate loadings. The elastic modulus showed no strain rate sensitivity for the 0 degrees axial tension. However, for other loading conditions, the elastic modulus was enhanced by 1.7-7.2 times under high strain rate loading. The strength was increased by 1.2-2.5 times at 1000 s(-1) compared with that under quasi-static loading for different loading directions. For higher strain rate sensitivity under compression than tension, the asymmetry was less obvious with the increase of strain rate. Two phenomenological models were proposed to quantitatively fit the relationship between the strength property and strain rate, which showed great consistency between the experimental and fitted results.

Fiber Cross-Section Shape Effect on Rate-Dependent Behavior of Polymer Matrix Composites with Fbgs Sensors

Fiber Cross-Section Shape Effect on Rate-Dependent Behavior of Polymer Matrix Composites with Fiber Bragg Grating Sensors

Micromechanical Modeling on the Rate-Dependent Viscoplastic Behavior of Polymer Composites with Thermal Residual Stress Effect

Strain Rate Dependent Deformation of a Polymer Matrix Composite with Different Microstructures Subjected to Off-Axis Loading

Predicting the Elastoplastic Response of Fiber-Reinforced Metal Matrix Composites

Characterizing Multi Mechanical Behaviors for Epoxy-Like Materials under Wide Strain Rate Range

Numerical Simulation of Strain Rate Effect on the Inelastic Behavior of Metal Matrix Composites

On the Effect of Fiber Shape and Packing Array on Elastic Properties of Fiber-Polymer-Matrix Composites

Effects of Fiber Shape on Mechanical Properties of Fiber Assemblies

Strain rate influence on nonlinear response of polymer matrix composites

Experimental investigation on in-plane shear behavior of E-glass fiber/epoxy laminated composites under different strain rates

Effect of Fiber Cross Section Geometry on Cyclic Plastic Behavior of Continuous Fiber Reinforced Aluminum Matrix Composites

Nonlinear Mechanical Behavior of Glass Fiber/ Epoxy Resin Composite Under Medium and Low Strain Rates Loading

Micromechanical analysis of off-axis loading of fiber reinforced composites with imperfect interface bonding

Effect of the loading rate on viscoelastic interfaces with bridging fibers

Experimental Study Of In-Plane Mechanical Performance Of Carbon/Glass Hybrid Woven Composite At Different Strain Rates

Investigations of three-dimensional fiber orientation on mechanical impact behavior of short glass-fiber-reinforced PEEK composites

Micromechanical Modeling of Viscoplastic Behavior of Laminated Polymer Composites with Thermal Residual Stress Effect

Biaxial Yield Surface Investigation of Polymer-Matrix Composites

Modeling and Characterizations of Mechanical Behaviors of Short Carbon Fiber and Short Glass Fiber Reinforced Polyetherimide Composites

Experimental Study on Nonlinearity of Unidirectional Carbon Fibre-Reinforced Shape Memory Polymer Composites