Abstract:This study aimed to develop a finite element model to simulate the geogrid-reinforced flexible pavement structure by taking into account the lateral confinement effect of geogrid layer, the interaction between geogrid and aggregate/soil, and the nonlinear cross-anisotropy of geogrid-reinforced unbound granular material (UGM). First, an analytical model was proposed to quantify the effect of the lateral confinement of geogrid layer on the resilient modulus of UGM. By comparing to the laboratory triaxial test results, the developed analytical model was proven to accurately predict the resilient modulus of geogrid-reinforced UGM. Second, the Goodman interface element model was used to characterize the contact behavior of geogrid-aggregate/soil interface. In order to simulate the nonlinear cross-anisotropic behavior of geogrid-reinforced UGM, a user-defined material (UMAT) subroutine was programmed using the secant modulus approach. The accuracy of the developed UMAT was verified by comparing the numerical simulation results to the analytical solutions in a virtual triaxial test.Two pairs of geogrid-reinforced and unreinforced pavement models were analyzed in this study. It was found that the geogrid reinforcement is effective in mitigating the rutting damage of base course and subgrade, but cannot significantly extend the fatigue life of flexible pavement. The geogrid reinforced in the middle of the base course is better at reducing the rutting damage of base course than that placed at the base/subgrade interface. However, the geogrid reinforcement is much more effective in reducing the rutting damage of the subgrade when it is placed at the bottom of the base course. A comprehensive large-scale tank (LST) testing program was designed to record the critical pavement responses, including the surface deflection, the tensile strain at the bottom of the asphalt concrete, and the vertical stresses in base course and subgrade. The developed geogrid-reinforced and unreinforced finite element models were finally validated by comparing the model predictions with those measurements from the LST test.

Application of Granular Solid Hydrodynamics to A Well-Graded Unbound Granular Material Undergoing Triaxial Tests

Influence of Grain Gradation on Permanent Strain of Unbound Granular Materials under Low Confining Pressure and High-Cycle Loading

Impact of Geogrid on Cross-Anisotropy and Permanent Deformation of Unbound Granular Materials

Characterization and prediction of permanent deformation properties of unbound granular materials for Pavement ME Design

Analysis of Parameters in Granular Solid Hydrodynamics for Triaxial Compression Tests

Numerical Modeling of Geogrid-Reinforced Flexible Pavement and Corresponding Validation Using Large-Scale Tank Test

Modeling of Unsaturated Granular Materials in Flexible Pavements

Experimental study on dynamic characteristics of unbound granular materials under cyclic loading with different frequencies

Granular solid hydrodynamics and analyses on triaxial compressions

Resilient and permanent deformation of unsaturated unbound granular materials under cyclic loading by the large-scale triaxial tests

The Steady State Solution of Granular Solid Hydrodynamics for Triaxial Compressions

Analysis of granular mechanical parameters characteristics in graded gravel triaxial test

Granular Solid Hydrodynamics (GSH): a broad-ranged macroscopic theory of granular media

Applying GSH to a Wide Range of Experiments in Granular Media

Long-term Behavior of Clay-Fouled Unbound Granular Materials Subjected to Cyclic Loadings with Different Frequencies

Thermal Effects on Shear Characteristics of Unbound Granular Materials under Drained Conditions

Evaluation of Critical Dynamic Stress and Accumulative Plastic Strain of an Unbound Granular Material Based on Cyclic Triaxial Tests

Long Term Cyclic Behavior of Unsaturated Granular Soils

Water Retention Behavior and Shear Strength of Artificially Cemented Granite Residual Soil Subjected to Free Drying

Numerical Study on the Shear Strength of Granular Materials under the Low Confining Pressure

Development of elasto-plastic constitutive model for unbound granular materials under repeated loads