Abstract:This research focuses on 3D printable thermoplastic polyurethane filaments embedded with multi‐walled carbon nanotubes for enhanced strain sensing in large deformations. It explores the electromechanical properties of the filaments, identifying a conductive threshold in the composite material. The study also examines the application of these filaments in flexible structures, particularly for soft robotics and wearable electronics. This study investigates the development of thermoplastic polyurethane (TPU) filaments incorporating multi‐walled carbon nanotubes (MWCNT) to enhance strain‐sensing capabilities. Various MWCNT reinforcement ratios are used to produce customized feedstock for fused filament fabrication (FFF) 3D printing. Mechanical properties and the piezoresistive response of samples printed with these multifunctional filaments are concurrently evaluated. Surface morphology and microstructural observations reveal that higher MWCNT weight percentages increase filament surface roughness and rigidity. The microstructural modifications directly influence the tensile strength and strain energy of the printed samples. The study identifies an apparent percolation threshold within the 10–12 wt.% MWCNT range, indicating the formation of a conductive network. At this threshold, higher gauge factors are achieved at lower strains. A newly introduced Electro‐Mechanical Sensitivity Ratio (ESR) parameter enables the classification of composite behaviors into two distinct zones, offering the ability to tailor self‐sensing structures with on‐demand properties. Finally, flexible structures with proven application in soft robotics and shape morphing are fabricated and tested at different loading conditions to demonstrate the potential applicability of the custom filaments produced. The results highlight a pronounced piezoresistive response and superior load‐bearing performance in the examined structures.

Controlling the Dynamic Percolation of Carbon Nanotube Based Conductive Polymer Composites by Addition of Secondary Nanofillers: the Effect on Electrical Conductivity and Tuneable Sensing Behaviour

Electrical Conductivity and Thermal Sensing of CNTs/Polymer Nanocomposites

Selective localization of multi-walled carbon nanotubes in thermoplastic elastomer blends: An effective method for tunable resistivity-strain sensing behavior

MWCNTs-GNPs Reinforced TPU Composites with Thermal and Electrical Conductivity: Low-Temperature Controlled DIW Forming

Tunable Electrical Conductivity Of Carbon-Black-Filled Ternary Polymer Blends By Constructing A Hierarchical Structure

Percolation behavior and sensing performance of polypropylene‐based conductive polymer composites under compressive strains and temperature

Percolation and Gas Sensing Behaviours of Ternary Conductive Composites: Vapour-Grown Carbon Fibres/Carbon Black/Poly(Methyl Methacrylate)

Modified resistivity-strain behavior through the incorporation of metallic particles in conductive polymer composite fibers containing carbon nanotubes

Towards tunable sensitivity of electrical property to strain for conductive polymer composites based on thermoplastic elastomer.

Tunable Conductive Composite for Printed Sensors and Embedded Circuits

Effect of Melt Mixing Conditions on the Mechanical, Electrical, and Strain Sensing Properties of Carbon Nanotube–Styrene Butadiene Styrene/Thermoplastic Polyurethane Nanocomposites with a Double-Percolation Structure

Effect of Thermal Annealing on the Electrical Conductivity of High-Strength Bicomponent Polymer Tapes Containing Carbon Nanofillers

Conductive Network Formation and Electrical Properties of Poly(Vinylidene Fluoride)/Multiwalled Carbon Nanotube Composites: Percolation and Dynamic Percolation

Electrical Conduction and Dynamic Rheology of Multi-Walled Carbon Nanotubes and Hydrophobic Nanosilica-Filled Immiscible Poly(Methylmethacrylate)/Polystyrene Blends

Fabrication of Copolymer-Grafted Multiwalled Carbon Nanotube Composite Thermoplastic Elastomers Filled with Unmodified Mwcnts As Additional Nanofillers to Significantly Improve Both Electrical Conductivity and Mechanical Properties

Fabrication and Characterization of Electrically Conductive 3D Printable TPU/MWCNT Filaments for Strain Sensing in Large Deformation Conditions

Preparation of High‐Performance Conductive Polymer Fibers Through Morphological Control of Networks Formed by Nanofillers

Recyclable, healable, and stretchable thermoset shape memory polythiourethane/carbon nanotube composite with segregated conductive structure for strain sensing

Constructing a Double-Percolated Conductive Network in a Carbon Nanotube/polymer-Based Flexible Semiconducting Composite

Synergistic Effect in Conductive Networks Constructed with Carbon Nanofillers in Different Dimensions

Reduced Percolation Threshold of Multi-Walled Carbon Nanotubes/polymer Composites by Filling Aligned Ferromagnetic Particles