Abstract:The Westinghouse Electric Company's Advanced Passive Reactor (AP1000) is characterized by the incorporation of passive safety systems (PSSs) designed to ensure core cooling during transient events. The assessment of PSSs requires evaluation of their performance through a combination of experiments and simulations employing various thermal-hydraulic codes. In addition, detailed evaluation of PSSs for a specific reactor system transient analysis such as loss-of-coolant-accident analysis supports understanding representative integral effects test facility development and the further evolution model development and assessment process. Developing a reactor system code is a complex and time-consuming process that requires significant engineering expertise and effort. It can take several months to even years to complete in the early stages of reactor system design and analysis. However, this process can be expedited through the use of transient simulator models for similar reactor systems, which can be used for lesson learning and training purposes. This study uses the Personal Computer Transient Analyzer (PCTRAN) code. The main advantage of PCTRAN is its ease of use and ability to run faster than real time. This study presents the results obtained for a small-break loss-of-coolant accident (SBLOCA) for two breaks using the full version (licensed) of PCTRAN. The purpose of this investigation is to evaluate the overall system behavior during the postulated SBLOCA event as well as assess the capability of the PCTRAN code to reproduce the system response during transient events. The obtained results were compared with the Westinghouse NOTRUMP system code. The PCTRAN code proved to be reliable in predicting the qualitative behavior of the system in both transient cases. As for the system response, it was found that it is contingent on the activation time of the PSSs. The differences in reactor coolant system pressure between the two codes were attributed to the critical flow model and simplification of mass and energy balance. Despite PCTRAN's limitations, it can still provide a reasonable prediction of various reactor parameters such as pressure, mass flow rate, and void fraction during a SBLOCA scenario. It is worth noting that PCTRAN currently employs a bulk approach similar to that of the Modular Accident Analysis Program (MAAP) and MELCOR codes. However, the upcoming version of PCTRAN will include an artificial intelligence–based detection and accident prevention system, as well as different models for different reactor components. Consequently, PCTRAN has the potential to be upgraded to match the system thermal-hydraulic codes of the U.S. Nuclear Regulatory Commission and become more widely used in cybersecurity to safeguard nuclear power plants from cyberattacks.

Transient and Safety Analysis Code for Tp-1 Sodium Cooled Twr

ThermaI-hydrauIics anaIysis in traveIing-wave reactor based on FLUENT software coupIing with point reactor kinetic modeI

Research on Single Channel and Subchannel in Thermal-hydraulic Analysis of TP-1 Sodium Cooled TWR

Development of Safety Analysis Code TACOS and Application to Fuel Qualification Test Loop

Development of Transient Analysis Code for SCWR

Development of Safety Analysis Code for SCWR and Its LOCA Analysis of CSR1000

Numerical Simulation of Temperature and Flow Fields Under Steady State Condition in Core for TP-1 Sodium Cooled TWR Based on Porous Media Model

ICONE23-1792 DEVELOPMENT OF TRANSIENT THERMAL-HYDRAULIC ANALYSIS CODE FOR THE SPACE THERMIONIC REACTOR

Development of TACOS code for loss of flow accident analysis of SCWR with mixed spectrum core

Development of a Thermal–hydraulic Safety Analysis Code RETAC for AP1000

Transient Safety Analysis of A Transportable Fluoride-Salt-Cooled High-Temperature Reactor Using Relap5-3d

Transient Thermal–hydraulic Analysis of a Space Thermionic Reactor

Development of a Transient Analysis Code for Trans-Critical Simulation of SCWR

Study on Transient Characteristics of SCWR under Typical Accidents by TACOS Code

Code Development For The Neutronics/Thermal-Hydraulics Coupling Transient Analysis Of Molten Salt Reactors

Analysis of AP1000 Small-Break Loss-of-Coolant Accident Using Reactor Transient Simulator

Development of a Thermal-Hydraulic Analysis Code and Transient Analysis for a FHTR

Steady-state and transient simulations of the MTR research reactor using the high-fidelity N-TH coupling method

Modeling and Transient Numerical Analysis on Passive Residual Heat Removal System in AP1000

Thermal Hydraulic Design and Analysis of Thorium-based Advanced CANDU Reactor (TACR)

Transient Analysis of Tritium Transport Characteristics in Fluoride-Salt-cooled High-Temperature Reactor