Research on vortex induced motion of a deep draft semisubmersible with four rectangular columns

Zhining Bai,Longfei Xiao,YuFeng Kou,LiJun Yang

2013-01-01

Abstract:In recent years, Vortex Induced Motion (VIM) of floating structures such as Spar, Semi-submersible, TLP, etc, has proved to be a very relevant subject for the design of mooring and riser systems. The Deep Draft Semi-submersible (DDS) is a typical multi-column floater. With longer exciting length than the conventional Semi-submersible's, it shows obvious VIM phenomenon. Furthermore, its VIM characteristics are more complicated compared to Spar platform because of the flow interference between columns. The model test of a DDS with four rectangular columns and four pontoons is carried out in a towing tank to study its VIM response. The 6-DOF motions are measured under different current directions and velocities. Conclusions about the DDS's VIM characteristics are drawn from the model test. It is shown that a DDS may experience significant VIM in the transverse and in-line direction and its amplitude is strongly dependent not only on the current directions but also on the reduced velocity Ur regularly. The lock-in range is defined as 6<Ur<8 according to response amplitudes and frequencies. In order to better understand the mechanics of this phenomenon, the numerical simulation based on the unsteady Reynolds-averaged Navier-Stokes (RANS) method is done using a simplified two-dimensional model. The model consists of the cross sections of four rectangular columns. The numerical study includes two parts: The cross-flow around four stationary columns and the VIM response of four columns moving freely. The numerical results can help explain the experimental results. And their general agreements on the response amplitudes indicate that the numerical simulation is effective in predicting VIM characteristics of a multicolumn floater. Copyright © 2013 by the International Society of Offshore and Polar Engineers (ISOPE).