Abstract:"Burn-in" degradation occurs in many polymer solar cells, which dramatically reduces the overall power output of the cells at the early hundred hours. Understanding the "burn-in" degradation mechanism is therefore highly important to improve the lifetime of the cell. In this article, the decay behaviors of P3HT:PC61BM solar cells depending on the molecular weight of P3HT were systematically investigated. Although all of these P3HTs were highly crystalline with regioregularity of 94–97%, the stability of P3HT:PC61BM cells showed a nonmonotonic dependence on P3HT molecular weight. The cells based on P3HT with a weight average molecular weight (Mw) of 20 K showed much faster decadence in open circuit voltage (VOC) and fill factor (FF) during aging, yielding the lowest stability in comparison with that based on P3HT of 10, 25, and 30 K. UV–vis absorption and external quantum efficiency spectra demonstrated that the performance decay is not attributed to the change in the photoactive layer. The recovery of VOC and FF of the aged cells after renewing the MoO3/Al electrode revealed that the performance decay is mainly because of the interfacial degradation of P3HT:PC61BM/MoO3. Electron spin resonance spectroscopy and X-ray photoelectronic spectroscopy confirmed the photon-induced redox reaction between P3HT and MoO3 under light illumination, where P3HT is oxidized to the polaron and Mo(VI) was partially reduced to Mo(V). The photon chemical reduction (PCR) of MoO3 by P3HT is then ascribed as the essential reason for the fast VOC and FF decays of the cells during aging. The surface morphology of the photoactive layer measured by the atomic force microscope revealed the much rougher surface of the P3HT-20 K/PC61BM film. Such a rough surface increases the contact area between P3HT and MoO3, and consequently enhances the PCR of MoO3 and P3HT, which is considered as the main reason for the molecular weight-dependent degradation behaviors. For the first time, the current work clearly demonstrates that the photoreduction of the metal oxide and photoactive layer would lead to fast VOC and FF decays, which could be a very important degradation pathway for polymer solar cells.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsaem.0c01325?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsaem.0c01325</a>.J–V curves, EQE spectra, statistical data, FTPS and degradation curves of solar cells before and after aged, UV–vis spectra, XRD patterns, TEM images, ESR spectra, and XPS spectra of different films (<a class="ext-link" href="/doi/suppl/10.1021/acsaem.0c01325/suppl_file/ae0c01325_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Intrinsic Burn-in Efficiency Loss of Small-Molecule Organic Photovoltaic Cells Due to Exciton-Induced Trap Formation

The Role Of Exciton Delocalization In The Performance Of Bulk-Heterojunction Polymer Solar Cells

Eliminating the Burn-in Loss of Efficiency in Organic Solar Cells by Applying Dimer Acceptors as Supramolecular Stabilizers

An Efficient, “Burn in” Free Organic Solar Cell Employing a Nonfullerene Electron Acceptor

Observation of reversible light degradation in organic photovoltaics induced by long-persistent radicals

Unexpectedly Slow Yet Efficient Picosecond to Nanosecond Photoinduced Hole-Transfer Occurs in a Polymer/Nonfullerene Acceptor Organic Photovoltaic Blend

Evolution of interfacial defects and energy losses during aging of organic photovoltaics

Photochemical Decomposition of Y‐Series Non‐Fullerene Acceptors Is Responsible for Degradation of High‐Efficiency Organic Solar Cells

Tackling Energy Loss for High-Efficiency Organic Solar Cells with Integrated Multiple Strategies.

High Luminescence Stability Enables Reduced Burn‐in Voltage Loss in Organic Solar Cells

Relationship between charge transfer state electroluminescence and the degradation of organic photovoltaics

Improving Performance of Organic Photovoltaic Devices under Low Illuminations

Slow Hole Transfer Kinetics Lead to High Blend Photoluminescence of Unfused A–D–A′–D–A‐Type Acceptors with Unfavorable Highest Occupied Molecular Orbitals Offset

Elucidating performance degradation mechanisms in non-fullerene acceptor solar cells

Understanding the operational lifetime expansion methods of thermally activated delayed fluorescence sensitized OLEDs: a combined study of charge trapping and exciton dynamics

Degradation Of Small-Molecule Organic Solar Cells

Triplet Excitons and associated Efficiency-Limiting Pathways in Organic Solar Cell Blends based on (Non-) Halogenated PBDB-T and Y-Series

Photophysical pathways in efficient bilayer organic solar cells: The importance of interlayer energy transfer

Revealing Photodegradation Pathways of Organic Solar Cells by Spectrally Resolved Accelerated Lifetime Analysis

Durable Organic Photovoltaics Enabled by a Morphology‐Stabilizing Hole‐Selective Self‐Assembled Monolayer

Revealing the Interfacial Photoreduction of MoO 3 with P3HT from the Molecular Weight-Dependent “Burn-In” Degradation of P3HT:PC 61 BM Solar Cells