Abstract:This article proposes a hierarchical collaborative reactive power and voltage control method aimed at meeting the internal voltage requirements of a coupled system composed of centralized new energy stations such as wind and solar power and traditional thermal power units, with particular attention paid to the reactive power regulation ability of power units in new energy stations. This method is implemented in two layers: At the transmission layer, the overall reactive power compensation capacity of thermal power units and stations on the transmission lines within the system is determined according to the engineering requirements of different node voltages in the coupled system, the regulation voltages of the high-voltage grid-connected points and the point of common coupling (PCC) of the stations are found, and the actual regulation voltages of the PCCs of the stations are given as commands. At the station layer, based on determining reactive power distribution between power units and continuous reactive power compensation devices within each station, voltage optimization is carried out using the voltage command issued by the transmission layer as a reference. At the same time, consistency coordination between the transmission layer and the station layer is achieved based on the Analytical Target Cascading (ATC) method at different layers. Finally, simulation analysis was conducted on a regional coupled system in Dalian. The results showed that the method proposed in this paper can effectively control the voltage safety requirements of each region and PCC in the coupled system and, to some extent, improve the economic efficiency of system operation.

Mechanism of Voltage Control Mismatch Between Provincial Power Grid and Regional Power Network and Its Three-Dimensional Analysis

A Three-stage Network Partition Method for Secondary Voltage Control Based on Agglomerative Analysis

MPC-Based Coordinated Voltage Regulation for Distribution Networks with Distributed Generation and Energy Storage System

Network Partition Method for Reactive-voltage Control Considering Reactive Power Balance Based on Community Structure Theory

A Two-Level System-Wide Automatic Voltage Control System

Impact of SVC Control Mode on Voltage Abnormal Oscillation in Wind Power Influx Area

Applications of Coordinated Automatic Voltage Control Integrated for Regional,Provincial and Prefectural Control Centers in China Southern Power Grid

Research on generation and execution of coordination strategy for bi-directional and interactive coordinated voltage control between provincial and district levels

An Adaptive Zone-Division Approach for Voltage Control of Power Grid with Distributed Wind Farms: A Case Study of a Regional Power Grid in Central South China

Hybrid Automatic Voltage Control Strategy And Its Application To Northeast China 500kv Power Grid

A New Coordinated Voltage/reactive Power Control Scheme for Interconnected Power Systems

Spatial-Temporal Coordinated Volt/Var Control for Active Distribution Systems

Coordination of Continuous Variables and Discrete Variables in Automatic Voltage Control Part One Coordinated Voltage Control for Substations

Analysis of the Status of Voltage and Reactive Power Control in Jiangsu 220 Kv Grid

A Multi-area Coordinated Power Dispatch Method for Provincial Power Grid

Collaborative Control of Reactive Power and Voltage in a Coupled System Considering the Available Reactive Power Margin

Model and Methods of Generation and Transmission Scheduling of Inter-regional Power Grid via HVDC Tie-line

Automatic voltage control for ultra-high voltage AC neighboring grids

The Research on the Hybrid Automatic Voltage Control of Northeast China Power Grid

Coordination of Continuous Variables and Discrete Variables in Automatic Voltage Control Part Two Coordinated Voltage Control among Power Plants and Substations

Predictive Voltage/Var Control Based On Hybrid Frame In Distribution Power Systems