Abstract:The high electronic-mobility ZnO was developed as binder with a mesoporous carbon (MC) as catalytic material to fabricate a novel ZnO-MC counter electrode through in-situ formation technique. The homogeneous MC blended paste containing the ZnO sol was first coated on the conductive substrate, and then annealed in ambient atmosphere to obtain the ZnO-MC electrode. The annealing temperature is a key factor to obtain the high-performance ZnO-MC electrode. When annealed at 300 degrees C, the in-situ formed and dispersed ZnO nanoparticles are functioned as bridges to bind the MC particles and to strengthen the adhesion of the carbon film to the substrate, providing enough conductive paths for the transportation of the electrons to participate timely in the reduction of tri-iodide (I-3(-)), and further improving the electrochemical performances of the electrode. As a result, the efficiency of the ZnO-MC electrode for use in dye-sensitized solar cells (DSCs) enhances from 2.5% to 6.37% compared with the binder-free MC electrode. Importantly, the ZnO-MC electrode exhibits higher catalytic activity for the I-3(-) reduction than the MC electrode using carboxymethyl cellulose (CMC) as binder, leading to an increase of 14.2% in the efficiency of the cell, which is mainly from the high electronic-mobility of the ZnO. Furthermore, the efficiency of the low cost ZnO-MC based DSCs reaches 90.4% of that of the Pt based ones. Noted that compared with the Pt electrode, the ZnO-MC electrode is beneficial to obtain a device with higher open-circuit voltage. (C) 2013 Elsevier Ltd. All rights reserved.

One Dimensional Cuins2-Zns Heterostructured Nanomaterials As Low-Cost And High-Performance Counter Electrodes Of Dye-Sensitized Solar Cells

In Situ Synthesis of Metal Sulfide Nanoparticles Based on 2D Metal-Organic Framework Nanosheets.

In Situ Grown Vertically Oriented CuInS2 Nanosheets and Their High Catalytic Activity As Counter Electrodes in Dye-Sensitized Solar Cells.

One-Step Electrochemical Deposition of Hierarchical Cus Nanostructures on Conductive Substrates As Robust, High-Performance Counter Electrodes for Quantum-Dot-Sensitized Solar Cells

ChemInform Abstract: Low‐Cost Copper Zinc Tin Sulfide Counter Electrodes for High‐Efficiency Dye‐Sensitized Solar Cells.

Octahedron Shaped Lead Sulfide Nanocrystals As Counter Electrodes for Quantum Dot Sensitized Solar Cells

FeS2-sensitized ZnO/ZnS Nanorod Arrays for the Photoanodes of Quantum-Dot-sensitized Solar Cells

CuInS<sub>2</sub> Nanocrystals/PEDOT:PSS Composite Counter Electrode for Dye-Sensitized Solar Cells

In situ solvothermal growth of Cu2ZnSnS4 thin film for counter electrode of dye-sensitized solar cells

Low Cost Nis As an Efficient Counter Electrode for Dye-Sensitized Solar Cells

CuNi2S4-reduced graphene oxide composites as an efficient counter electrode for high performance dye-sensitized solar cells

Low‐Cost Copper Zinc Tin Sulfide Counter Electrodes for High‐Efficiency Dye‐Sensitized Solar Cells

1D Colloidal Hetero‐Nanomaterials with Programmed Semiconductor Morphology and Metal Location for Enhancing Solar Energy Conversion

Facile Synthesis of CoNi Bimetallic Nanoparticle Decorated Reduced Graphene Oxide As Efficient and Low-Cost Counter Electrode for Dye-Sensitized Solar Cells.

Low-cost Counter Electrodes Based on Nitrogen-Doped Porous Carbon Nanorods for Dye-Sensitized Solar Cells

In-situ Formation of Dispersed ZnO Nanoparticles in Mesoporous Carbon Counter Electrode for Efficient Dye-Sensitized Solar Cells

Nanoparticle-based Hierarchical Zinc Oxide Chains for Enhanced Efficiency of Dye-Sensitized Solar Cells

Low-Cost Snsx Counter Electrodes for Dye-Sensitized Solar Cells

Preparation of Cu-doped ZnO nanoparticles via layered double hydroxide and application for dye-sensitized solar cells

Solution-Processed One-Dimensional ZnO@CdS Heterojunction toward Efficient Cu2ZnSnS4 Solar Cell with Inverted Structure

A Low Cost Mesoporous Carbon/sno2/tio2 Nanocomposite Counter Electrode for Dye-Sensitized Solar Cells