Abstract:In a rectangular cross-section wind tunnel, a separated oblique shock reflection is set to interact with the turbulent boundary layer (oblique shock wave/turbulent boundary layer interaction (SBLI)) both on the bottom wall and in the corners formed by the intersection of the floor with the sidewalls. To examine how corner separations can affect the ‘quasi-two-dimensional’ main interaction and by what mechanisms this is achieved, an experimental investigation has been conducted. This examines how modifications to the corner separation affect an $M=2.5$ oblique shock reflection. The nature of the flow field is studied using flow visualisation, pressure-sensitive paint and laser Doppler anemometry. The results show that the size and shape of central separation vary considerably when the onset and magnitude of corner separation changes. The primary mechanism explaining the coupling between these separated regions appears to be the generation of compression waves and expansion fans as a result of the displacement effect of the corner separation. This is shown to modify the three-dimensional shock structure and alter the adverse pressure gradient experienced by the tunnel floor boundary layer. It is suggested that a typical oblique SBLI in rectangular channels features several zones depending on the relative position of the corner waves and the main interaction domain. In particular, it has been shown that the position of the corner ‘shock’ crossing point, found by approximating the corner compression waves by a straight line, is a critical factor determining the main separation size and shape. Thus, corner effects can substantially modify the central separation. This can cause significant growth or contraction of the separation length measured along the symmetry line from the nominally two-dimensional baseline value, giving a fivefold increase from the smallest to the largest observed value. Moreover, the shape and flow topology of the centreline separation bubble is also considerably changed by varying corner effects.

Treatment of Corners in Characteristic Non-Reflecting Boundary Conditions by Direct Numerical Simulation

Treatment of Edge in Characteristic Non-reflecting Boundary Conditions

The study of corner echo inspection with bulk and creeping waves effect in ultrasonic testing

Direct numerical simulation of characteristic non-reflecting boundary conditions in treatment of face

Boundary Treatment of Numerical Simulation in Wind Flow around Buildings

Characterization Of Near-Field Coupling Effects From Complicated Three-Dimensional Structures In Rectangular Cavities Using Fast Integral Equation Method

A New Coupled Computational Method in Conjunction with Three-Dimensional Finite Volume Schemes for Nonlinear Coupled Constitutive Relations

Sound Field Separating on Arbitrary Surfaces Enclosing a Sound Scatterer Based on Combined Integral Equations.

Numerical Investigation on Local Non-equilibrium Flows Using a Diatomic Nonlinear Constitutive Model

Numerical simulation of water entry using CIP model

Slip Boundary Conditions for Rough Surfaces

Numerical Analysis of the Micro-Couette Flow Using a Non-Newton–fourier Model with Enhanced Wall Boundary Conditions

Numerical Simulations of Buoyant Reactive Jets with Sidewall Effects

A Robust and High Precision Algorithm for Elastic Scattering Problems from Cornered Domains

Corner effects for oblique shock wave/turbulent boundary layer interactions in rectangular channels

High frequency corner diffraction via gtd and liouville

Numerical Simulation of Subsonic Free Jet with Time-Dependent Boundary Conditions

Direct Numerical Simulation of the Transitional Boundary-Layer Flow Induced by an Isolated Hemispherical Roughness Element

Influence of compressibility on the development of streamwise supersonic corner flow

Study on Numerical Simulation of the Annular Jet Formation and Penetration