Abstract:In this paper, an exploration of the practical thermodynamic performance limits of the organic Rankine cycle (ORC) under working fluid and cycle parameter restrictions is presented. These performance limits are more realistic benchmarks for the thermodynamic cycle than the efficiency of the Carnot cycle. Subcritical ORC configuration with four typical case studies that are related to temperature ranging from 373.15 to 673.15 K is taken into account. The ORC is defined by its cycle parameters and working fluid characteristic properties. The cycle parameters involve evaporation temperature ( T eva ), condensation temperature ( T con ) and superheat degree (Δ T sup ), while the working fluids are represented by the characteristic properties including critical temperature ( T c ), critical pressure ( p c ), acentric factor ( ω ), and molar ideal gas isobaric heat capacity based on the principle of corresponding states. Subsequently, Pareto optimum solutions for obtained hypothetical working fluids and cycle parameters are achieved using multi-objective optimization method with the consideration of both thermal efficiency ( η th ) and volumetric power output (VPO). Finally, sensitivity analysis of the working fluid characteristic properties is conducted, and the second law of thermodynamics analysis, especially the applicability of entropy generation minimization, is performed. The results show that the current commonly used working fluids are widely scattered below the Pareto front that represents the tradeoff between η th and VPO for obtained hypothetical fluids. T eva and T con are the most dominant cycle parameters, while T c and ω tend to be the most dominant characteristic property parameters. The entropy generation minimization does not give the same optimal results.

Examination of the Expander Leaving Loss in Variable Organic Rankine Cycle Operation

Experimental Investigations on Dynamic Performance of Organic Rankine Cycle Integrated with Latent Thermal Energy Storage under Transient Engine Conditions

Operation of an Organic Rankine Cycle Dependent on Pumping Flow Rates and Expander Torques

Experimental Study of the Organic Rankine Cycle under Different Heat and Cooling Conditions

Operation and performance of a low temperature organic Rankine cycle

Development and Dynamic Characteristics of an Organic Rankine Cycle

Simulations on Organic Rankine cycle with quasi two-stage expander under cross-seasonal ambient conditions

Experimental investigation of an organic Rankine cycle with liquid-flooded expansion and R1233zd(E) as working fluid

Evaluation of external heat loss from a small-scale expander used in organic Rankine cycle

Experiment Study on Organic Rankine Cycle System Using Scroll Expander

Energetic and Exergetic Investigation of an Organic Rankine Cycle at Different Heat Source Temperatures

Performance Simulation of a Twin-screw Expander Using R513A as Working Fluid in Organic Rankine Cycle System

Effect of Flow Losses in Heat Exchangers on the Performance of Organic Rankine Cycle

Experimental investigation on organic Rankine flash cycle with high- and low-stage scroll-expanders for thermal power generation

Experimental Study of Organic Rankine Cycle in the Presence of Non-Condensable Gases

Design of the Orc (organic Rankine Cycle) Condensation Temperature with Respect to the Expander Characteristics for Domestic Chp (combined Heat and Power) Applications

Experimental Verification of a Rolling-Piston Expander That Applied for Low-Temperature Organic Rankine Cycle

Effect of Evaporation Temperature on the Performance of Organic Rankine Cycle in Near-Critical Condition

Experimental and Modeling Investigation of an Organic Rankine Cycle System Based on the Scroll Expander

Analysis of the Thermodynamic Performance Limits of the Organic Rankine Cycle in Low and Medium Temperature Heat Source Applications

Experimental Studies of Organic Rankine Cycle Systems Using Scroll Expanders with Different Suction Volumes