Abstract:For the problem of aerodynamic/structural integrated design about a transonic aircraft, an aerodynamic/structural integrated design method is developed in consideration of the influence of static aeroelasticity. The numerical evaluation method in the integrated design is established on the basis of full potential equations and boundary layer correction. A loose coupled method based on three dimension radial basis functions (RBF) interpolation is adopted to analyze the static aeroelasticity. An improved differential evolution algorithm is chosen as the optimization algorithm for the design. The comparisons between the numerical results and the experiment data for benchmark models CRM and DLR-F6 show that the numerical technology and the loose coupled static aeroelasticity analysis method are reliable. By respectively choosing twist angle distributions and airfoil sections as the design parameter, together with the static aeroelasticity effect taken into account, the optimization method established is used in aerodynamic/structural integrated design for a transonic aircraft. Due to these two optimizations, the flying ranges are increased by 5.63％ and 3.05％, respectively. The improvement in range owes to the distribution changes in the wing load and the structural thickness. In the twist distribution design case, 6.53％ improvement in lift-drag ratio is obtained at the expense of 3.2％ increase in the structural weight. However, in the airfoil sections design case, the lift-drag ratio is increased by 1.53％, and the structural weight is decreased by 3.56％. The design results `is increased by 1.53％, and the structural weight is decreased by 3.56％. The design results show that the integrated optimization design method constructed in this paper is reasonable and practical.

An Aeroelastic Optimization Design Approach for Structural Configuration of Flying Wings

Aircraft Wing Structural Design Optimization Based on Automated Finite Element Modelling and Ground Structure Approach

An Aerodynamic Shape Optimization of Transonic Wing Design Method for Aeroelastic System

Optimization of composite wing using genetic algorithm

Aero-structural Optimization of Supersonic Wing under Thermal Environment Using Adjoint-Based Optimization Algorithm

Aerodynamic-structure Multidisciplinary Optimization Design of Wing Based on Response Surface Methodology

Optimization Method of Wing Planform Considering Structural Weight

Aeroservoelastic Design Optimization of Flexible Wings

Aeroelastic Optimization Design for Wing with Maneuver Load Uncertainties

Aeroelastic Optimization Design for High-Aspect-Ratio Wings with Large Deformation

Integrate Shape/size Optimization into a High Aspect-Ratio Flying Wing Design

Structural Optimization and Aeroelastic Analysis of a Subsonic Flying Wing Configuration

Aeroelastic Two-Level Optimization for Preliminary Design of Wing Structures Considering Robust Constraints

Multiscale Aeroelastic Optimization Method for Wing Structure and Material

Robust structural design optimization of flexible backswept wings

Composite Wing Elastic Axis for Aeroelasticity Optimization Design

Optimization Design for Aero-Elastic Morphing Wings

Structure Optimization of Airfoil Based on ISIGHT/NASTRAN

Robust Aeroelastic Optimization Design of a Composite Wing

Primary Modeling and Analysis of Wing Based on Aeroelastic Optimization

Aerodynamic/structural integrated design for aircraft wing with static aeroelasticity effect