Abstract:In order to further promote the application of cementitious sand gravel (CSG), the mechanical properties and variation rules of CSG material under triaxial test were studied. Considering the influence of fly ash content, water-binder ratio, sand rate and lateral confining pressure, 81 cylinder specimens were designed and made for conventional triaxial test, and the influence laws of stress-strain curve, failure pattern, elastic modulus, energy dissipation and damage evolution of specimens were analyzed. The results showed that the peak of stress-strain curve increased with the increase of confining pressure, and the peak stress, peak strain and energy dissipation all increased significantly, but the damage variable D decreased with the increase of confining pressure. Under triaxial compression, the specimen was basically sheared failure from the bonding surface, and the aggregate generally did not break. Sand rate had a significant effect on the peak stress of CSG, and decreased with the increase of sand rate. Under the conditions of the same cement content, fly ash content and confining pressure, the optimal water-binder ratio 1.2 existed when the sand rate was 0.2 and 0.3. After analyzing and processing the stress-strain curve of triaxial test, a Cuckoo Search-eXtreme Gradient Boosting (CS-XGBoost) curve prediction model was established, and the model was evaluated by evaluation indexes R2, RMSE and MAE. The average R2 of the XGBoost model based on initial parameters under 18 different output features was 0.8573, and the average R2 of the CS-XGBoost model was 0.9516, an increase of 10.10%. Moreover, the prediction curve was highly consistent with the test curve, indicating that the CS algorithm had significant advantages. The CS-XGBoost model could accurately predict the triaxial stress-strain curve of CSG.

Large-scale triaxial tests for CSG materials

Mechanical properties of CSG material based on large triaxial tests

Dynamic Constitutive Relation and Dynamic Modulus Attenuation Model of CSG Materials

A new model for prediction of deformation on CSG material

Modified Duncan-Chang Model Considering Physical Properties of Saturated Clays

A nonlinear constitutive model for soft clay stabilized by magnesia cement considering the effect of solidified agent content

Study of Mechanics Behavior and Constitutive Model of Cemented Soil under Static Triaxial Tests

Multi-angle property analysis and stress-strain curve prediction of cementitious sand gravel based on triaxial test

Experimental study of the direct shear characteristics of cement grout under constant normal loading and stiffness boundary conditions

Experimental Research on Static and Dynamic Characteristics of Cement Soil under Strain Control

Dynamic Modulus Characteristics of Saturated Clays under Variable Confining Pressure

The failure criterion of cemented sand and gravel material based on strength test

Experimental Study on Engineering Properties of Cemented Soil with High Water Content

BEHAVIOR OF PORE WATER PRESSURE IN DYNAMIC TRIAXIAL TESTS OF SATURATED SOFT CLAY AND ITS EFFECT ON EFFECTIVE STRESS PATH

Influence of Cyclic Loading History on Small Strain Shear Modulus of Saturated Clays

Stress–strain Response of Soft Clay to Traffic Loading

Undrained Dynamic Behaviors of Saturated Clays under Compressive Stress Paths Considering Cyclic Confining Pressure

Deformation Characteristics of Saturated Clay in Three-Dimensional Cyclic Stress State

Study on Macroscopic and Mesoscopic Mechanical Behavior of CSG based on Inversion of Mesoscopic Material Parameters

Strain and pore pressure development on soft marine clay in triaxial tests with a large number of cycles

Cyclic Deformation Behaviour of Natural K 0 -Consolidated Soft Clay under Different Stress Paths