Abstract:Rotate vector (RV) reducers are typical deceleration elements that moderate and increase torsion. They are widely applied in industrial robots and automatic machinery with the superiorities of compact structure, high precision, and overload resistance performance. However, the RV reducers also have disadvantages, such as low bearing capacity and short service life. As the core drive mechanism in an RV reducer, the bearing capacity for a cycloid-pin gear drive system directly affects the performance of the entire deceleration system. Therefore, the bearing capacity of an RV reducer should be improved by increasing the capacity of a cycloid-pin gear. In this paper, the design of a cycloid-pin gear is optimized to improve its bearing capacity. The tooth profile equations for cycloid gear and the meshing gap are derived based on the gear meshing principle. The bearing capacity for cycloid-pin gear is modeled by combining the contact strength theory with the multi-tooth contact bearing analysis. The effects of eccentricity, the radius of pin tooth distribution circle, pin teeth number, pin tooth radius, cycloid thickness, modification value of moved distance and equidistance on total volume, contact stress, and torsional stiffness are systematically researched. Then, a single-, double-, and three-objective optimization model is proposed based on the load-bearing capacity for cycloid-pin gear by taking these three factors as the objective function. Moreover, the parameters are optimized with the genetic algorithm, and the analyses for three optimizations are compared and discussed. The theoretical models are confirmed by the simulation analysis through ANSYS software. The results show that the bearing capacity for the cycloid-pin gear system can be largely enhanced after optimization.

Global Optimization Design of Spur Gear Drive

Multiobjective Optimization of Three-Stage Spur Gear Reduction Units Using Interactive Physical Programming

A method for the global optimization of the tooth contact pattern and transmission error of spiral bevel and hypoid gears

A novel forward performance-driven design method for gear parameters

Research on application of dynamic optimization modification for an involute spur gear in a fixed-shaft gear transmission system

Optimization of the Loaded Contact Pattern of Spiral Bevel and Hypoid Gears Based on a Kriging Model

Design Optimization on Automobile Final Drive in Genetic Algorithm and Neural Network

Computational Design and Optimization of Non‐Circular Gears

Optimization Design of Three-Stage Cylindrical Gear Reducer

Optimization of Planetary Gear Transmission System of the Large Vertical Gearbox

Multi-objective optimized design for modified cycloid-pin gear drive mechanism based on load-bearing capacity

Gear design Optimization for Low-Contact Temperature of a High-Speed , Non-Lubricated Spur Gear Pair

An Analysis of Load-Bearing Capacity of Gearing with Small Teeth Number Difference and its Volume Optimization

Study of Gearbox's Robust Optimization Design

Multi-objective optimization of cycloidal gear based on segmental modification of pressure angle

Reliability design and optimization of the planetary gear by a GA based on the DEM and Kriging model

Optimization of Topological Modification Parameters for Heavy-Duty Helical Gears

Multi-objective optimization design of cycloid pin gear planetary reducer

A Grinding Method with an Innovative, Efficient, and Weight-Saving Design for Double Helical Gears

Multi-objective optimization of helical gear transmission geometric parameters using MOPSO

A multi-objective optimization design approach of large mining planetary gear reducer