Abstract:A study was conducted to investigate the effects of relative thickness on the static and dynamic characteristics of airfoils. A series of NACA symmetric airfoils with relative thickness ratios ranging from 12% to 30% have undertaken a series of sinusoid pitching motion simulations and these airfoils' Glasgow wind tunnel experiment data were analyzed. It was found that the relative thickness of airfoils would affect the stall onset angle of attack (AOA), the severity of the stall, and the dynamic stall model parameters. As the relative thickness of airfoils increases, static and dynamic stall onset AOA decrease and stall occurs earlier. At the static AOA, the thickest airfoil shows a very large reverse flow region. At the dynamic stall onset AOA, the thinner airfoil exhibits a more obvious burst of the laminar separation bubble. When the relative thickness of the airfoil is smaller, a dynamic stall occurs with more severity. On the one hand, the aerodynamic characteristic curve and suction surface pressure curve of airfoils change are more complicated. And the severity of the dynamic stall was quantitatively compared by extracting the difference of lift coefficients corresponding to the same AOA in the upstroke and downstroke stages. On the other hand, vortex occurrence, convection and shedding on the suction surface of the airfoil are more frequent and complicated. This paper also gives a method to solve the problem of the lack of the dynamic stall model parameters of blades section airfoils when predicting the wind turbine's unsteady force.

Static Pressure Modification for Piston Theory Aerodynamics and Its Application to the Analysis of Curved Panel Flutter

Modified Fourier-Galerkin Solution For Aerospace Skin-Stiffener Panels Subjected To Interface Force And Mixed Boundary Conditions

Aerothermoelastic behaviors of curvilinear fiber composite panels based on the refined zig-zag theory

Investigation of the Flutter Stability of a Transonic Fan with Inlet Distortion

Numerical Analysis on Physical Mechanism of Flexible High-Rise's Unstable Aeroelastic Phenomena in Cross-Wind

Aerothermoelastic analysis of curvilinear fiber variable stiffness laminated panels in supersonic flow

Analytical and Experimental Study on Deformation of Thin-Walled Panel with Non-Ideal Boundary Conditions

Experimental and Numerical Flutter Analysis Using Local Piston Theory with Viscous Correction

Influence of Relative Thickness on Static and Dynamic Stall Characteristics and Prediction of Airfoils

Nonlinear Aero-Thermo-Elastic Stability Analysis of a Curve Panel in Supersonic Flow Based on Approximate Inertial Manifolds

Panel flutter analysis of plate element based on the absolute nodal coordinate formulation

Nonlinear flutter of composite laminated panels with local non-smooth friction boundaries

Nonlinear thermal flutter of variable angle tow curved panels with elastically restrained edges in supersonic airflow by generalized Galerkin method

Flutter Calculations Using the Unsteady Source and Doublet Panel Method

A Combined Method of CFD Simulation and Modified Beddoes-Leishman Model to Predict the Dynamic Stall Characterizations of S809 Airfoil

Dynamically Linearized Time-Domain Approach for Limit-Cycle Oscillation Prediction for an Elastic Panel

Thermal-Aeroelastic Investigation of a Hypersonic Panel Vibration Based on a Developed MMC Method

Aeroelastic Stability Analysis of a Laminated Composite Sandwich Panel With a Magnetorheological Fluid Core Under Yawed Supersonic Airflow

Numerical Investigation of Classic Flutter Mechanism Under Circumferentially Non-Uniform Inlet Condition

Three-Dimensional Flutter Numerical Simulation of Wings in Heavy Gas and Transonic Flutter Similarity Law Correction Method

Flutter stability analysis of composite corrugated plates in supersonic flow