Abstract:Continuum manipulators have infinite degrees of freedom and high flexibility, making it challenging for accurate modeling and control. Some common modeling methods include mechanical modeling strategy, neural network strategy, constant curvature assumption, etc. However, the inverse kinematics of the mechanical modeling strategy is difficult to obtain while a strategy using neural networks may not converge in some applications. For algorithm implementation, the constant curvature assumption is used as the basis to design the controller. When the driving wire is tight, the linear controller under constant curvature assumption works well in manipulator position control. However, this assumption of linearity between the deformation angle and the driving input value breaks upon repeated use of the driving wires which get inevitably lengthened. This degrades the accuracy of the controller. In this work, the Koopman theory is used to identify the nonlinear model of the continuum manipulator. Under the linearized model, the control input is obtained through model predictive control (MPC). As the lifted function can affect the effectiveness of the Koopman operator-based MPC (K-MPC), a novel design method of the lifted function through the Legendre polynomial is proposed. To attain higher control efficiency and computational accuracy, we use a selective control scheme according to the state of the driving wires. When the driving wire is tight, the linear controller is employed; otherwise, the K-MPC is adopted. Finally, a set of static and dynamic experiments have been conducted using an experimental prototype. The results demonstrate high effectiveness and good performance of the selective control scheme.

Position Control Strategy and Experimental Research of A 2R Underactuated Planar Flexible Manipulator

Dynamic Modeling and Analysis for Coupling Processing 6-DOF 3 P3 R Manipulator

A Unified Approach for Second-Order Control of the Manipulator With Joint Physical Constraints

Decoupled Dynamic Model and Control of Flexible Space Manipulator

Drift Suppression Control Based on Online Intelligent Optimization for Planar Underactuated Manipulator With Passive Middle Joint

Virtual Model Reduction-based Control Strategy of Planar Three-link Underactuated Manipulator with Middle Passive Joint

Unified Motion/Force/Impedance Control for Manipulators in Unknown Contact Environments Based on Robust Model-Reaching Approach

A Tracking Control Method for a PPR Underactuated Manipulator

Two-Stage Control Strategy Based on Motion Planning for Planar Prismatic–Rotational Underactuated Robot

Hierarchical Decoupling Controller with Cylinder Separated Model of Hydraulic Manipulators for Contact Force/Motion Control

A Control Strategy of a Two Degrees-of-Freedom Heavy Duty Parallel Manipulator

A Hybrid Model and Model-Free Position Control for a Reconfigurable Manipulator

Dynamic modeling and sensor-based stable control for two-link flexible manipulators

Kinematic-Free Position Control for A Deformable Manipulator

Modeling and Active Vibration Control of an Intelligent Flexible Manipulator System

Whole Body Control of an Autonomous Mobile Manipulator Using Series Elastic Actuators

Robust Position Control of a Continuum Manipulator Based on Selective Approach and Koopman Operator

Trajectory Control of Robot Manipulator Using Variable Structure Model-Reaching Control Strategy

Unified Method for Task-Space Motion/Force/Impedance Control of Manipulator With Unknown Contact Reaction Strategy

Characteristics Analysis and Stabilization of A Planar 2r Underactuated Manipulator

A model-based PID-like motion control method for flexible-joint manipulator with harmonic drives