Abstract:Concrete structures in cold regions are highly susceptible to internal cracks due to the periodic variation of temperature and the alternation of drying and wetting in the long term. Conventional damage detecting techniques for concrete are often destructive and need tedious manual operation. Concrete strain monitoring is a non-destructive measurement technique, which provides continuously streaming strain data and has the potential of detecting damage automatically based on a data-driven approach. Temperature-induced strains are highly responsive to damage to concrete structures under the freeze-thaw (F-T) cycles. In this regard, we propose a novel damage detection approach based on temperature-induced strains. The proposed method separates the temperature-induced component from the measured data based on the independent component analysis, which improves the modeling accuracy of the Gaussian processes modeling (GPM) approach for detecting damage. The principle of damage detection is extracting the features related to the damage from the measured strain data. The model residuals of temperature-induced strains are extracted as features that are sensitive to concrete damage. A novel damage index is established to determine the presence of structural damage based on the Kolmogorov Smirnov (KS) test, which estimates the probability distribution of residuals. To increase the reliability of damage detection and decrease the pseudo fault alarm rate, the general extreme value (GEV) theory is considered to determine a reliable threshold limit. A moving window strategy is introduced to perform damage detection and identify the damage occurrence time effectively. Monitoring data of the F-T cycle experiment are utilized to validate the proposed method. The results of three different damage cases demonstrate the effectiveness of the proposed data-driven method in terms of detecting the damage and identifying the damage occurrence time. The variation rules of the concrete temperature characteristics are revealed through the damage detection results under F-T cycles.

Online Damage Detection Using Pair Cointegration Method of Time-Varying Displacement

On the Use of Distance Measures in the Phase Portrait for Damage Localisation and Severity Assessments

A Gaussian Processes-Based Approach for Damage Detection of Concrete Structure Using Temperature-Induced Strain

Structural Plastic Damage Warning and Real-Time Sensing System Based on Cointegration Theory

A Survey On Damage Detection Methods: Advantages And Shortages

Damage detection under environmental and operational effects using cointegration analysis – Application to experimental data from a cable-stayed bridge

Test Analysis of Detection of Damage to a Complicated Spatial Model Structure

A kernel canonical correlation analysis approach for removing environmental and operational variations for structural damage identification

Structural Damage Detection and Localization with Unknown Post-Damage Feature Distribution Using Sequential Change-Point Detection Method

Cointegration strategy for damage assessment of offshore platforms subject to wind and wave forces

Detection of Structural Damage in a Shaking Table Test Based on an Auto-Regressive Model with Additive Noise

Damage detection in composite structures using vibration response under stochastic excitation

Damage Detection for Expansion Joints of a Combined Highway and Railway Bridge Based on Long-Term Monitoring Data

Damage Identification of Long-Span Bridges Based on the Correlation of Probability Distribution of Monitored Quasi-Static Responses

Output-Based Structural Damage Detection by Using Correlation Analysis Together with Transmissibility

Damage alarming for bridge expansion joints using novelty detection technique based on long-term monitoring data

Online early damage detection and localisation using multivariate data analysis: Application to a cable‐stayed bridge

Damage detection based on accelerometers and computer vision measurements of moving load-induced structural responses

The Hybrid Multivariate Analysis Method for Damage Detection

Damage detection of wind turbine blades by Bayesian multivariate cointegration