Abstract:Stretchable electrodes are an essential component that determines the functionality and reliability of stretchable electronics, but face the challenge of balancing conductivity and stretchability. Here, we propose a new conducting concept called the interfacial percolation network (PN) that results in stretchable electrodes with high conductivity, large stretchability, and high stability. The interfacial PN was composed of a two‐dimensional (2D) PN and a protruding PN embedded on the surface and in the near‐surface region of an elastic polymer matrix, respectively. The protruding PN was the key design to intimately link the 2D conducting channels on the surface of the elastomer with the 3D conducting channels in the bulk of the elastomer. The protruded PN was obtained by changing the arrangements of silver nanowires (AgNWs) from horizontal to quasi‐vertical through introducing foreign polymer domains in the near‐surface region of the polymer matrix. The resulting electrode achieved a conductivity of 13,500 S cm−1 and a stretchability of up to 660%. Its resistance changes (i.e., R/R0) under stretched conditions were orders of magnitude lower than those of conventional 2D PN and 2D + 3D PN. This electrode performed stability in various physicochemical conditions, including being soaked in acid and alkaline solutions for 20 days, heated at 80 °C for 10 days, stretched to 80% for 10000 cycles, and scratched by a sharp needle. The concept of interfacial PN was broadly applicable to common conductors used in stretchable electronics, such as graphene, gold film, Ag film, and liquid metal. The conductivity of the interfacial PN electrode made from liquid metal remained at 46,750 S cm−1 after the electrode underwent multiple stretch‐release cycles with a deformation of >600%. The concept of interfacial PN provides fruitful implications for the design of stretchable electronics. This article is protected by copyright. All rights reserved

Development of a Stretchable Conductor Array with Embedded Metal Nanowires

Ag Nanowire-Based Stretchable Electrodes and Wearable Sensor Arrays

Stretchable Interconnections Based On Horseshoe Shape Metal Nanowires

Ultrastretchable Electrically Self-Healing Conductors Based on Silver Nanowire/Liquid Metal Microcapsule Nanocomposites

Ultrastretchable and Self-Healing Conductors with Double Dynamic Network for Omni-Healable Capacitive Strain Sensors

Self-healing and Superstretchable Conductors from Hierarchical Nanowire Assemblies

A fast self-healable and stretchable conductor based on hierarchical wrinkled structure for flexible electronics

Conformable Skin-Like Conductive Thin Films with AgNWs Strips for Flexible Electronic Devices

Dynamic Ag-N Bond Enhanced Stretchable Conductor for Transparent and Self-Healing Electronic Skin.

Multidimensional Aligned Nanowires Array: Toward Bendable and Stretchable Strain Sensors

A Skin-Like Pressure Sensor Array Based On Silver Nanowires And Conductive Elastomer

Ultrastretchable Hybrid Electrodes of Silver Nanowires and Multiwalled Carbon Nanotubes Realized by Capillary‐Force‐Induced Welding

3D Interconnected Conductive Graphite Nanoplatelet Welded Carbon Nanotube Networks for Stretchable Conductors

Stretchable Electrodes with Interfacial Percolation Network

Fully Embedded CuNWs/PDMS Conductor with High Oxidation Resistance and High Conductivity for Stretchable Electronics

Fabrication of a flexible and stretchable three-dimensional conductor based on Au–Ni@graphene coated polyurethane sponge by electroless plating

Fabrication and Conductive Mechanism Analysis of Stretchable Electrodes Based on PDMS-Ag Nanosheet Composite with Low Resistance, Stability, and Durability

Flexible conductor fabrication via silver nanowire deposition on a polydopamine-modified pre-strained substrate

Stretchable Conductors by Kirigami Patterning of Aramid-Silver Nanocomposites with Zero Conductance Gradient

Octopus-like carbon nanomaterial for double high stretchable conductor

Development of a Skin-Like Tactile Sensor Array for Curved Surface