Abstract:Potassium dihydrogen phosphate (KDP) is a non-linear material used in various opto-electronic applications including Q-switches, high-speed photography shutters, frequency harmonic generation lens and Pockels cells in the Inertial Confinement Fusion (ICF) devices. KDP belongs to the most difficult-to-cut material, due to its delicate and unique characteristics including the combination of softness with brittleness, anisotropic performances, tendency for deliquescence and sensitivity to temperature change. Single point diamond turning (SPDT) is considered to be the ideal method for machining KDP components. However, the process efficiency is rather low and often accompanied with severe tool wear issues. This paper studies the feasibility using grinding method to remove the surface material of KDP components with high process efficiency and low damage, fulfilling the task of re-aligning the surface orientation to the crystalline axis. The grinding tests were carried out on a common CNC grinder, using resin bonded diamond grinding wheel, whilst the diamond abrasives are coated with Ni-P alloy. The direction of precision grinding was determined by studying the anisotropy of KDP, including its elastic modulus E, Vickers hardness HV and fracture toughness KIC, to reduce the influence of material anisotropy on machining quality. The grinding process parameters were preliminarily determined based on the experimental results investigating the effects of peripheral speed of the grinding wheel, worktable feed rate and grinding depth on the ground surface roughness. The surface defects, surface morphology and sub-surface damage under different process parameters were investigated. Surface roughness Ra ≤ 0.3 μm and sub-surface damage depth SSD ≤ 6 μm were obtained. The machining efficiency can be improved by nearly ten times using the proposed precision grinding method, producing nearly the same surface quality (Ra ≤ 0.2 μm, SSD ≤ 6 μm) as that in the axis fixing phase in SPDT.

Research on Full-Aperture Ductile Cutting of KDP Crystals Using Spiral Turning Technique

Critical Cutting Condition for Brittle-Ductile Transition of KDP Crystals in Ultra-Precision Machining

Research on the Ultra-Precision Ductile Cutting Mechanism of KDP Crystal

Study on the Mechanism of Brittle-Ductile Transition for Turning KDP Crystal with Single Point Diamond

An Experimental and Theoretical Investigation on the Brittle Ductile Transition and Cutting Force Anisotropy in Cutting Kdp Crystal

Research On Critical Condition Of Brittle-Ductile Transition And The Influence Factors To Surface Quality Of Kdp Crystal In Ultra-Precision Cutting

Realization of High Efficiency and Low Damage Machining of Anisotropic KDP Crystal by Grinding

Research on Subsurface Defects of Potassium Dihydrogen Phosphate Crystals Fabricated by Single Point Diamond Turning Technique

Effect of Crystallographic Orientation on Cutting Forces and Surface Finish in Ductile Cutting of Kdp Crystals

Research on Critical Cutting Thickness of KDP Crystals by Spirally Grooving

Analysis of Mechanical Property of Crystal KDP and Simulation of Ultra-Precision Cutting Process in the Ductile Mode

Simulation analysis of the effect of tool geometry in diamond turning of KDP crystal

Methods for Surface Defect Suppression in Fly-Cutting Fabrication of KDP Crystals

Experimental Investigation Of Cutting Mechanism Of Kdp Crystal

A Vacuum Sucking Approach to Preventing Chips from Attaching to Machined Surface in Cutting of KDP Crystals

Simulation of ultra-precision cutting process of KDP crystal in ductile mode

Investigation of Anisotropic Mechanisms in Ultra-Precision Diamond Machining of KDP Crystal

Effect of Cutting Parameters on Surface Quality in Ductile Cutting of KDP Crystal Using Self-Developed Micro PCD Ball End Mill

Experimental Investigation on Diamond Drilling of Potassium Di-Hydrogen Phosphate (kdp) Crystal

Experimental Investigation of Processing Technology for Surface Quality of KDP Crystal Machined by Single Point Diamond Turning

Research on Compensation of Suction Deformation Error of Potassium Dihydrogen Phosphate Crystal.