Abstract:Compressible flow past a circular cylinder at an inflow Reynolds number of 2 x 10 5 is numerically investigated by using a constrained large-eddy simulation (CLES) technique. Numerical simulation with adiabatic wall boundary condition and at a free-stream Mach number of 0.75 is conducted to validate and verify the performance of the present CLES method in predicting separated flows. Some typical and characteristic physical quantities, such as the drag coefficient, the root-mean-square lift fluctuations, the Strouhal number, the pressure and skin friction distributions around the cylinder, etc. are calculated and compared with previously reported experimental data, finer-grid large-eddy simulation (LES) data and those obtained in the present LES and detached-eddy simulation (DES) on coarse grids. It turns out that CLES is superior to DES in predicting such separated flow and that CLES can mimic the intricate shock wave dynamics quite well. Then, the effects of Mach number on the flow patterns and parameters such as the pressure, skin friction and drag coefficients, and the cylinder surface temperature are studied, with Mach number varying from 0.1 to 0.95. Non-monotonic behaviors of the pressure and skin friction distributions are observed with increasing Mach number and the minimum mean separation angle occurs at a subcritical Mach number of between 0.3 and 0.5. Additionally, the wall temperature effects on the thermodynamic and aerodynamic quantities are explored in a series of simulations using isothermal wall boundary conditions at three different wall temperatures. It is found that the flow separates earlier from the cylinder surface with a longer recirculation length in the wake and a higher pressure coefficient at the rear stagnation point for higher wall temperature. Moreover, the influences of different thermal wall boundary conditions on the flow field are gradually magnified from the front stagnation point to the rear stagnation point. Moreover, the influences of different thermal wall boundary conditions on the flow field are graduallymagnified from the front stagnation point to the rear stagnation point. It is inferred that the CLES approach in its current version is a useful and effective tool for simulating wall-bounded compressible turbulent flows with massive separations.

Laminar Flow Patterns Around Three Side-By-Side Arranged Circular Cylinders Using Semi-Implicit Three-Step Taylor-Characteristic-Based-Split (3-TCBS) Algorithm

Constrained Large-Eddy Simulation of Compressible Flow Past a Circular Cylinder

Computation of Flow Past an In-Line Oscillating Circular Cylinder and a Stationary Cylinder in Tandem Using a CIP-Based Model

Three-dimensional Numerical Simulation on Flow Past Three Circular Cylinders in an Equilateral-Triangular Arrangement

Numerical Simulation of Flow over Three Circular Cylinders in Equilateral Arrangements at Low Reynolds Number by a Second-Order Characteristic-Based Split Finite Element Method

Simulation of Flows Around Two Tandem Rotating Cylinders in a Channel Using LB-DF/FD Method

Flow over two side-by-side square cylinders by CBS finite element scheme of Spalart–Allmaras model

A Two‐step Taylor‐characteristic‐based Galerkin Method for Incompressible Flows and Its Application to Flow over Triangular Cylinder with Different Incidence Angles

Three-Dimensional Flow Around Two Tandem Circular Cylinders with Various Spacing at Re=220

Numerical Simulation for Flow Over two Circular Cylinders in Side-by-side Arrangement with Lattice Boltzmann Method

Simulation of flow around two rotating cylinders in a side-by-side arrangement at long channel using LB-DF/FD method

Efficient Three-Dimensional High-Resolution Simulations of Flow Fields Around Cylinders

Three-Dimensional Flow Around Two Circular Cylinders in Tandem Arrangement

Numerical analysis of the flow over four side-by-side square cylinders with different gaps

Numerical Investigation on Characteristic Flow Regions for Three Staggered Stationary Circular Cylinders

Numerical Study on Flow Around Four Square-Arranged Cylinders at Low Reynolds Numbers

Numerical Study of Low-Reynolds-number Flow Past Two Tandem Square Cylinders with Varying Incident Angles of the Downstream One Using a CIP-based Model

An Explicit Temporal Discretization Characteristic Based Split Algorithm and Its Application for Flow Past Bluff Body

A Semi-Implicit Three-Step Method Based on Supg Finite Element Formulation for Flow in Lid Driven Cavities with Different Geometries

Flow-Induced Forces and Vortex Transportation Characteristics of Three Circular Cylinders at Subcritical Reynolds Number

Turbulent Flow Simulation Using Large Eddy Simulation Combined with Characteristic-Based Split Scheme