Abstract:Due to the numerous and growing programs and applications of braid structures, understanding and predicting the mechanical behaviors of these structures is essential for engineers. In this paper, 12 tubular biaxial hybrid braids with different combinations and braiding angles were produced. They are made of two different yarns that one of them is a high-performance yarn and the other is an ordinary yarn. The tensile modulus as a mechanical property of a braided structure was compared in the different braiding angles and hybridization under the uniaxial tensile test. In addition to the experimental and statistical study presented in this research, a theoretical equation was also proposed to predict the tensile modulus of biaxial hybrid braided structures. The theoretical and experimental values are close. Also, statistical analysis of the proposed model showed the same results as statistical analysis of experimental results. So, it seems that the modified equation can be valuable and helpful. Also, several peaks in the second part of the load-extension diagram of hybrid braid observed that by increasing the amount of yarn with higher tensile properties in the hybrid braid structure, the number of peaks decreases. This is due to the fundamental difference in the type of yarn used in the production of hybrid braids. It could be said that this research may be a good start for future research on braid structures as advanced engineering materials.

FEA of Biaxial and Triaxial Braided Composite for Effective Material Property Evaluation and Effect of Braiding Angle on the Dynamic Behavior

Finite Element Modeling of Mechanical Properties of 3D Five-Directional Rectangular Braided Composites

An Analytical Model for Predicting the Elastic Properties of Triaxially Braided Composites

Meso-Scale Finite Element Analysis of Mechanical Behavior of 3D Braided Composites Subjected to Biaxial Tension Loadings

Finite element analysis of 2-D tubular braided composite based on geometrical models to study mechanical performances

Numerical Analysis of Free-Edge Effect on Size-Influenced Mechanical Properties of Single-Layer Triaxially Braided Composites

Numerical investigation of tensile behavior of three-dimensional six-directional braided composites

An experimental and theoretical investigation into the effect of braiding angle and combination on a tensile modulus of the tubular biaxial hybrid braids

STUDY ON THE ELASTIC PROPERTIES OF TRIAXIALLY BRAIDED COMPOSITES

Computational analysis of fatigue behavior of 3D 4-directional braided composites based on unit cell approach.

Development of a generalized analytical model for tubular braided-architecture composites

Thermal stress distribution of multi-layered composite tubes affected by braiding angle

Experimental and numerical study of in-plane compressive properties and failure of 3D six-directional braided composites with large braiding angle

Evaluation of elastic properties of 3D 4-directional braided composites

Mesoscale progressive damage and strength analysis of three-dimensional braided composites under tension

Thermo-mechanical response of 3D braided composites with different braiding angles under high strain rate punch shear loading

Ultimate Strength Prediction of Two-Dimensional Tri-Axial Braided Composites Based on an Analytical Laminate Model

The effect of interface properties on the mechanical behaviour of 3D braided composites under unidirectional tensile loading

EXPERIMENTAL MODAL ANALYSIS ON DYNAMIC CHARACTERISTICS OF BRAIDED STRUCTURAL COMPOSITES

Numerical Study on the Tensile Behavior of 3D Four Directional Cylindrical Braided Composite Shafts