Abstract:Multiple degrees-of-freedom (multi-DOF) hydraulic manipulators are usually recognized as hard-to-control systems to achieve dynamic trajectory tracking because of strong nonlinearities, uncertainties, and complex couplings within the dynamics. In practice, when the end-effector of the multi-DOF hydraulic manipulator is tracking a given trajectory continuously, some joints may experience frequent stop-and-go or low-speed motions due to its kinematics. In such situations, dynamic friction becomes one of the main factors that affect the control performance. Inadequate compensation for the dynamic friction can result in undesired crawling or oscillatory behaviors of the manipulator. However, it is challenging to make effective compensation of the dynamic friction in control design due to its complicated and nonlinear properties. In this article, motion control of a multi-DOF hydraulic manipulator with extra consideration on the nonlinear friction for dynamic trajectory tracking is proposed. First, to make a more precise compensation of the nonlinear friction force, an improved LuGre model ensuring continuity and differentiability is developed, along with the method for obtaining nominal values of internal friction state based on desired trajectories. Then, a model-based adaptive robust motion controller is developed for the multi-DOF hydraulic manipulator. The nonlinearities and uncertainties of the high-order dynamics are well addressed in the closed-loop system, and the transient and asymptotic tracking performance can be guaranteed in theory. Finally, experimental validation was conducted, and the comparison with existing methods showed the improved tracking performance.

State Estimate-Based Robust Adaptive Control of A Linked Mass-Spring System with Nonlinear Friction

State Estimate-based Friction Fuzzy Modeling and Robust Adaptive Control

Robust Control of Uncertain Robotic Systems: an Adaptive Friction Compensation Approach

Advanced Motion Control of Hydraulic Manipulator with Precise Compensation of Dynamic Friction

Adaptive Control based Friction Estimation for Tracking Control of Robot Manipulators

Improved adaptive robust control of servo system with harmonic drive

Force Estimation and Motion Control of Hydraulic Manipulators Based on Extended State Observer

Adaptive Robust Precision Motion Control of a Flexible System with Unmatched Model Uncertainties

Extraction and Adaptation of Fuzzy Rules for Friction Modeling and Control Compensation

Robust Adaptive Fuzzy Control for a Class of Stochastic Nonlinear Systems with Dynamical Uncertainties

A Combined Backstepping and Small-Gain Approach to Robust Adaptive Fuzzy Control for Strict-Feedback Nonlinear Systems

Data Mining and Systems Theory Based Fuzzy Modeling and Control Compensation for Friction

Adaptive Robust Control of Servo Mechanisms With Compensation for Nonlinearly Parameterized Dynamic Friction.

Robust Control for Static Loading of Electro-hydraulic Load Simulator with Friction Compensation

Robust Control of A Linear Actuator with Nonlinear Dynamic Friction and Unknown Width Input Dead-Zone

Adaptive Robust Control for Servo System with Friction and Input Dead-Zone Nonlinearity

Robust Adaptive Control for Spacecraft Attitude Tracking with Unknown Friction Torque of Reaction Wheel

Adaptive robust disturbance rejection backstepping control of a novel friction electro-hydraulic load simulator

Active Control of Friction-Induced Self-Excited Vibration Using Adaptive Fuzzy Systems

Fuzzy Control of Robotic Manipulators in the Presence of Joint Friction and Load Changes

Adaptive State-Feedback Shared Control for Constrained Uncertain Mechanical Systems