Abstract:Network-on-chip (NoC) has played a vital role in enabling high-speed and energy-efficient data communication among different cores in a multi- or many-core System-on-Chip (SoC). To mitigate the pessimistic timing margin reversed for severe process, voltage, and temperature (PVT) variations, we presented a wide supply voltage range router with a novel error detection and correction (EDAC) technique adopted in its latch-based pipeline for high energy efficiency. Especially, a unified clock-gated error correction scheme is presented to address dynamic timing errors under PVT variations and functional pipeline stalls when occurring allocation failure (packet fails to obtain an output port) or flow control (the next router stalls the current packet transmitting) in one cycle. Moreover, a latch-based pipeline structure with three non-overlapped clocks is adopted to further reduce the short-path padding overhead, which is significantly increased in the ultra-low voltage (ULV) regime. Consequently, we prototyped a $2\times2\,\,2\text{D}$ mesh NoC test chip with 28-nm CMOS technology. Compared with the margined baseline with a 10% VDD drop, measurement results show that the proposed router enables $1.4\times $ , 32.4%, and 7.5% improvements in frequency, energy, and area, respectively. Furthermore, the proposed techniques can reduce packet loss by $200\times $ and increase throughput by 19.9% for the NoC at 0.4 V, 25 °C.

Design and implementation of dynamic reliable virtual channel for network-on-chip

A Fault-Tolerant Network-on-chip Design Using Dynamic Reconfiguration of Partial-Faulty Routing Resources

Design and Optimization of a Fault-Tolerant Deflection Router for Networks-on-Chip

Design Fault-tolerant Router for Network-on-Chip

Fault-tolerant routing method of NoC system based on clustering

REPAIR: A Reliable Partial-Redundancy-Based Router in NoC

A new architecture for online error detection and isolation in network on chip

A Fault Tolerant NoC Architecture Using Quad-Spare Mesh Topology and Dynamic Reconfiguration

Fault-tolerant Routing for On-Chip Network Without Using Virtual Channels

Exploiting Low Cost Reliability For Noc Transient Routing Error

Low-cost Router Microarchitecture Based on Dimension-Switch for Fault-Tolerance in 2D-Mesh NoC

Configurable Redundant Routing for Network on Chip

A Novel Buffering Fault-Tolerance Approach for Network on Chip (Noc)

Maximizing the Inner Resilience of a Network-on-Chip through Router Controllers Design

A Deterministic-Path Routing Algorithm for Tolerating Many Faults on Very-Large-Scale Network-on-Chip

A Fault-Tolerant Routing Algorithm Design for On-Chip Optical Networks

Performance Enhancement of Routers in Networks-on-Chip Using Dynamic Virtual Channels Allocation

Defect-tolerant routing algorithm for low power NoCs based on buffer-shared router architecture

A scalable and fault-tolerant routing algorithm for NoCs

Architecture-level analysis and evaluation of transient errors on NoC

A Unified Clock-Gated Error Correction Scheme with Three-Phase Latch-Based Pipeline for Energy-Efficient Wide Supply Voltage Range Router