Abstract:Structural Health Monitoring, Ahead of Print. This paper presents a new approach for damage detection in thin plates by fusing variational mode decomposition and spectral entropy (VMD-SE). In this method, after the received signal is decomposed into some intrinsic mode functions (IMFs) by variational mode decomposition (VMD), the spectral entropy ratio of the first and last IMFs is calculated for optimizing the VMD's parameters and improving its decomposition performance. Moreover, the cross-correlation coefficient between the decomposed IMFs and the reference signal is computed to separate the desired IMF, which contains more damage information. Finally, the spectral entropy of the obtained IMF is calculated as an indicator for assessing the damage's severity. The comparative analysis of the simulated signal clearly shows that only the proposed method can successfully separate the damage-related and reference signals. To verify the VMD-SE method, damage detection of two different types of damage on aluminum and composite fiber-reinforced polymer (CFRP) plates is conducted by using this new approach. The experimental results demonstrate that the parameters of VMD affect greatly its decomposition performance, and the best parameters are selected. The results also indicate that the normalized spectral entropy monotonically increases when the diameter of the through-hole or the length of the scratch increases. In addition, the correlation coefficients of the fitting lines of the plates are larger than 0.998. The experimental results of aluminum specimens demonstrate that the damage's location has an influence on the normalized spectral entropy. At last, based on the linear relationship, the severity of damage in the fourth specimen is identified. The identification results demonstrate that the relative error of the aluminum and CFRP plates is less than 7.34%, which indicates that this new algorithm by fusing VMD and spectral entropy can detect the damage size in thin plates accurately and efficiently.

Damage detection method based on operating deflection shape curvature extracted from dynamic response of a passing vehicle

Ultrasonic Full Guided Wavefield for Damage Detection in Curved CFRP Parts

Detection and Quantification of Damage in Metallic Structures by Laser-Generated Ultrasonics

Damage Detection in Plates Structures Based on Frequency Shift Surface Curvature

Improved Damage Detection for Beam-type Structures Using a Uniform Load Surface

A Damage Detection Method Based on Flexible Macro-Fiber Composite

Curvature mode shape-based damage detection in composite laminated plates

Curvature Shape Based Impact Damage Detection in Composite Laminates

A Combined Static/Dynamic Technique for Damage Detection of Laminated Composite Plates

Study on Damage Detection Software of Beam-Like Structures

Two-Dimensional Gapped Smoothing Method for Impact Damage Detection of Composite Laminates

Dynamics-based Damage Detection of Composite Laminated Beams Using Contact and Noncontact Measurement Systems

A Damage Identification Approach for Plate Structures Based on Frequency Measurements

Damage detection in beam through change in measured frequency and undamaged curvature mode shape

Detecting localized damage in cantilevered structures under nonstationary ambient excitations via Gabor spectral mode transmissibility functions

LOCAL DAMAGE DETECTION OF SIMPLY SUPPORTED BEAM ON THE EXCITATION OF MOVING LOAD BASED ON AVERAGE CURVATURE MODAL

Damage detection for beam structures using an angle-between-string-and-horizon flexibility matrix

Damage detection of thin plates by fusing variational mode decomposition and spectral entropy

Damage Detection Algorithms and Sensor Systems for Laminate Composite Beams

Damage detection based on accelerometers and computer vision measurements of moving load-induced structural responses

Structural Damage Detection Based on Structural Macro-Strain Mode Shapes Extracted From Non-Stationary Output Responses