Abstract:The pore size distribution plays a crucial role in the gas-solid desulfurization reaction of Ca(OH) 2 , yet its impact on desulfurization performance is not fully understood, especially in low-to-medium temperature range (100–400 °C). This study examined the diffusion and adsorption characteristics of SO 2 in Ca(OH) 2 pores with different sizes by Monte Carlo Simulation and Molecular Dynamics Methods. The reaction kinetics of desulfurization for samples with different pore structures were analyzed based on TGA data and linear regression. It is found that the adsorption of SO 2 on Ca(OH) 2 was mainly induced by electrostatic interaction. Pores with the size of 5–15 nm were most favorable for SO 2 adsorption, with the maximum adsorption heat of 464.83 kJ/mol at 5 nm. When the pore size increased, the diffusion of SO 2 was improved, but the distribution of SO 2 became more scattered, resulting in an adverse effect on the desulphurization reaction. The desulphurization process can be divided into the surface reaction controlled stage and product layer diffusion controlled stage. The desulphurization ability was primarily contributed by the reaction controlled stage, in which Ca 2+ migration resistance was the least. Pore structure was a crucial factor in determining the duration of the reaction controlled stage. The presence of 15–30 nm pores was of significant importance for this stage. Yet in the diffusion controlled stage, pores size of ≥30 nm was much more important than other sizes to improve the Ca 2+ diffusion. This study shows that a reasonable pore size combination facilitates the diffusion of SO 2 and its reaction with Ca 2+ .

Effect of Pore Structure on Maximum Conversion of Desulfurization Reaction of Coal Combustion

Effect of CaO Pore Parameters on Desulfurization Reaction Rates

Numerical Study of Pore Structure Effect on SO2–CaO Reactions

Experimental Study on Preparation of Calcium Oxide by Coal Reduction of Calcium Sulfate in Carbon Dioxide Atmosphere

Experimental Investigation on Sulfur Transformation During Coal Steam Gasification with Ca-based Absorbent

The Effect of Metallic Salt Additives on Calcium-Based Desulfurization in O_2-CO_2 Pulverized Coal Combustion

Understanding the pore size distribution of Ca(OH) 2 for effective desulfurization under low-to-medium temperatures

Experimental Study on Combustion Desulfurization of Sludge Coal Water Slurry

Experimental Study of Desulfurization of Chemical-Loping Combustion of Coal With Calcium-based Oxygen Carrier

Microstructure Characteristics and Desulphurization of Nano-Caco_3 During Coal Combustion

The random pore model with intraparticle diffusion for the description of combustion of char particles derived from mineral- and inertinite rich coal

[Influence and Mechanism of Calcium-Based Desulfurizer on NO Conversion in Fluidized Bed of Coal].

Study on Kinetics of Desulfurization Reaction by Cao Particles

Modeling of the Pore Structure Evolution in Porous Char Particles During Combustion

Effect of heating rate of pyrolysis on coal particle pore structure

Numerical Study of the Relationships Between Pore Structures and Reaction Parameters for Coal Char Particles

CO2 Capture and Desulfurization in Chemical Looping Combustion of Coal with a CaSO4 Oxygen Carrier

Study on the Factors Influencing Limestone Capturing Sulfur During Coal Combustion

Investigation of Coal Char−Slag Transition during Oxidation: Effect of Temperature and Residual Carbon

Kinetics of Coal Char Combustion with Random Pore Model under O2/CO2 Atmosphere

A Modified Pore Evolution Particle Model Applied to CaCO3 Decomposition and CaO Sintering During Calcium Looping CO2 Cycles