Abstract:Graphene has been widely used in many fields due to its superior electrical conductivity, excellent mechanical flexibility, and high thermal and chemical stability, [1]. The extraordinary properties of graphene including high (ballistic) charge mobility and the potential for nor p-doping can provide high conductivity materials depending on their structural quality. Multiple applications including as materials for gas and energy storage could be within reach if irreversible aggregation, or re-stacking, of graphene nanosheets could be inhibited. Furthermore, its chemical inertness makes it difficult to attach gas molecules on the surface of graphene directly and interfacing the graphene surface with other nanoparticles is a possible solution [2,3]. In our recent work, graphene oxide was enlisted as a substrate to induce nanosized MOFs. By growth nanosized Cu-BTC on the surface of graphene, the GO/Cu-BTC composite shows improved hydrogen storage and CO2 capture performance.The composite material exhibited about a 30% increase in CO2 and H2 storage capacity (from 6.39 mmolg−1 of CuBTC to 8.26 mmol g−1 of CG-9 at 273 K and 1 atm for CO2; from 2.81 wt% of Cu-BTC to 3.58 wt% of CG-9 at 77 K and 42 atm for H2) [4]. By doping graphene with polyaniline and Pd nanoparticles, The resulting Pd–PANI– rGO nanocomposite was highly sensitive and selective to hydrogen gas, with fast response time in air at room temperature. The significantly enhanced sensitivity resulted from the faster spill-over effect, dissociation of hydrogen molecules on Pd, and the high surface area of the PANI–GO composite [5]. By doping graphene oxide with flower-like cobalt–nickel–tungsten–boron oxides, The Co–Ni–W–B–O/rGO composites resembled three-dimensional flowers with high surface area; they also exhibited superior electrochemical performance when compared to most previously reported electrodes based on nickel–cobalt oxides. Furthermore, the Co– Ni–W–B–O/rGO composite prepared in an ethanol solution showed much higher electrochemical performance than that the composite prepared in water. The Co–Ni–W–B–O/rGO electrode showed an ultrahigh specific capacitance of 1189.1 F g−1 at 1 A g−1 and exhibited an high energy density of 49.9 Wh kg −1 along with remarkable cycle stability, which is promising for application in energy storage devices [6]. By spontaneous polymerization of pyrrole and formation of PB nanocubes on GO, The resultant supercapacitor based on PPy– PB–GO exhibits both double-layer and pseudocapacitance. The hybrid electrode showed a maximum specific capacitance of 525.4 F g−1 at a current density of 5 A g−1. It also exhibited excellent cyclic stability of 96% retention for up to 2000 cycles [7]. Furthermore, we found that three-dimensional graphene aerogel encapsulated n-octadecane can enhance phasechange behavior and thermal conductivity [8]. Acknowledgements: The authors acknowledge the financial support from the NSFC (51361005, U1501242, 51371060 and 51671062), Guangxi NSFC (2014GXNSFAA118319, 2014GXNSFDA118005), and the Guangxi Key Laboratory of Information Laboratory (No. 161002-Z, 161002-K).

Leaf‐like Graphene Oxide with a Carbon Nanotube Midrib and Its Application in Energy Storage Devices

Graphene composites for energy storage and sensors

Graphene Oxide: A Promising Nanomaterial for Energy and Environmental Applications

A Lyotropic Liquid‐Crystal‐Based Assembly Avenue Toward Highly Oriented Vanadium Pentoxide/Graphene Films for Flexible Energy Storage

3D Interlaced Networks of VO(OH)(2) Nanoflakes Wrapped with Graphene Oxide Nanosheets As Electrodes for Energy Storage Devices

Recent Advances in Effective Reduction of Graphene Oxide for Highly Improved Performance Toward Electrochemical Energy Storage

Improving the Energy Storage Performance of Graphene through Insertion of Pristine CNTs and Ordered Mesoporous Carbon Coating

Reduced Graphene Oxide/Carbon Nanotube Composites as Electrochemical Energy Storage Electrode Applications.

Metal–Organic-Framework-Derived N-, P-, and O-Codoped Nickel/Carbon Composites Homogeneously Decorated on Reduced Graphene Oxide for Energy Storage

General Synthesis of Graphene/Metal Oxide Heterostructures for Enhanced Lithium Storage Performance

“Trunk-Leaf Vein” structure inspired synthesis of mesoporous Carbon@Nickel oxide/nickel ternary composite for sustainable supercapacitor electrode

Freestanding 3D mesoporous graphene oxide for high performance energy storage applications

A critical review on the properties and energy storage applications of graphene oxide/layered double hydroxides and graphene oxide/MXenes

Functionalized Carbon Nanotubes and Graphene-Based Materials for Energy Storage.

Twin-functional Graphene Oxide: Compacting with Fe2O3 into a High Volumetric Capacity Anode for Lithium Ion Battery

The formation of a carbon nanotube–graphene oxide core–shell structure and its possible applications

Regulating the Amount of Graphene Oxide for Enhanced Capacitive Energy Storage of MOF Derived Materials

Enhanced Electrochemical Capacitance and Oil-Absorbability of N-doped Graphene Aerogel by Using Amino-Functionalized Silica As Template and Doping Agent

Electrochemical Properties of Carbon Nanotube/graphene Oxide Hybrid Electrodes Fabricated Via Layer-by-layer Self-Assembly

Composite Nanoarchitectonics based on Graphene Oxide in Energy Storage and Conversion: Status, Challenges & Opportunities

Carbon Nanotube/Nitrogen-Doped Reduced Graphene Oxide Nanocomposites and Their Application in Supercapacitors